Search Results
Filter Your Search
Category Group
Shop by Category
MHT-63X77 has a wall thickness of 7 mm. The ID is 63 mm and the OD is 77 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $9.81 |
| 15-74 | $7.61 |
| 75-104 | $6.86 |
| 105+ | $6.24 |
Asymmetric rod seal designed with precision trimmed sealing lips to provide a dry sealing solution in light and medium-duty applications.
The Hallite 605 is molded in Hythane® 181, Hallite’s high-performance polyurethane, for easy installation and excellent low temperature performance.
Designed to have interference in the seal housing groove and has a secondary lip. The secondary sealing lip located behind the primary sealing lip improves stability of the seal in the gland.
The inner dynamic lip is shorter and more robust to improve sealing and compression set characteristics over conventional, symmetrical U-seals.
The seal can be considered for use in heavy-duty applications when used with a suitable full depth back-up ring. The sealing lips are precision trimmed at an angle to give optimal rod sealing performance.
- General purpose rod seal
- Robust design
- Excellent wear resistance
- Increase seal stability
- Performs well over wide temperature range and is extremely effective in low temperatures
- Primary lip protection
- Easy to install
O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.
70 Durometer | Buna-N Rubber Material | 5 in Nominal Inner Diameter | 1/8 in Cross Section | O-Ring
Features
- Pressure range varies according to diametral clearance
- Temperature range of -40 °F to -240 °F
Solid Urethane backup ring with a flat cross-section.
95A Durometer | Urethane Material | 2 3/4 in Nominal Inner Diameter | 1/8 in Cross Section | Backup Ring
Features
- High strength and abrasion resistance
- Wide temperature range
- Chemical resistance
- Low friction
- Easy installation
Solid Urethane backup ring with a flat cross-section.
95A Durometer | Urethane Material | 3 1/4 in Nominal Inner Diameter | 1/8 in Cross Section | Backup Ring
Features
- High strength and abrasion resistance
- Wide temperature range
- Chemical resistance
- Low friction
- Easy installation
ALHT8375X8000 has a 0.1875 in wall thickness. The ID is 8 in and the OD is 8.375 in. The material is 6063-T832 Aluminum.
Seamless extruded and cold-drawn. Hard coated on the ID which gives the aluminum tube a tough, abrasive-resitant surface.
6063-T832 Aluminum is used for pneumatic cylinder applications requiring very good corrosion resistance and/or light weight. Can also be used for low-pressure oil cylinders (250 psi or less).
- No machining required on the ID
- Seamless extruded and cold-drawn
- Hard coated interior
- Corrosion resistance
- Good weldability
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $32.84 |
| 15-44 | $23.48 |
| 45+ | $18.23 |
SS17-4/CPO-1375 has a 1.375 in diameter. The material is 17-4 Stainless Steel with Standard Chrome on the exterior.
Commonly used in offshore cranes, marine cylinders, and marine steering cylinders.
- Highest level of corrosion resistance
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $8.06 |
| 15-44 | $6.92 |
| 45-59 | $5.37 |
| 60-104 | $4.84 |
| 105+ | $4.41 |
55mm induction hardened chrome shafting. The base material is 1045/1050 Carbon Steel with 0.0005 in (0.0127mm minimum)-thick chrome plating and a case depth of 0.05 in (1.27 mm).
Induction Hardened Chrome is typically used in abrasive envrionments where the cylinder is exposed to rocks or heavy debris. Also used to machine clevis pins.
- Greater strength
- Better resistance to mechanical damage
Packages longer than 44 inches may have additional freight charges.
| 1-29 | $8.74 |
| 30-74 | $6.25 |
| 75-134 | $4.85 |
| 135-287 | $4.37 |
| 288+ | $3.97 |
35mm induction hardened chrome shafting. The base material is 1045/1050 Carbon Steel with 0.0005 in (0.0127mm minimum)-thick chrome plating and a case depth of 0.05 in (1.27 mm).
Induction Hardened Chrome is typically used in abrasive envrionments where the cylinder is exposed to rocks or heavy debris. Also used to machine clevis pins.
- Greater strength
- Better resistance to mechanical damage
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $5.46 |
| 15-29 | $3.64 |
| 30-89 | $2.73 |
| 90-134 | $2.42 |
| 135+ | $2.18 |
