Search Results
Filter Your Search
Category Group
Shop by Category
HWT-5000X3000 has a wall thickness of 1 in. The ID is 3 in and the OD is 5 in. The material is 1026 Carbon Steel.
Heavy Wall Tubes are used for machining high strength and close tolerance parts like bushings, axles, hydraulics, and sleeves.
Packages longer than 44 inches may have additional freight charges.
| 1-4 | $14.45 |
| 5-24 | $12.63 |
| 25-49 | $11.22 |
| 50+ | $10.11 |
CIHT6375X6000 has a wall thickness of 0.1875 in. The ID is 6 in and the OD is 6.375 in. The material is 1026 Carbon Steel with chrome plating on the Inside Surface.
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $12.00 |
| 15-74 | $10.66 |
| 75-104 | $9.60 |
| 105+ | $8.74 |
DUCT-2500 has a diameter of 2.5 in. The material is 65-45-12 Ductile Iron.
65-45-12 Ductile Iron is used to machine pistons, glands, caps, manifolds, rams, and valve bodies.
Ductile has higher machining speeds than steel and there is usually no need for deburring machined parts. The graphite flakes in the material act as a self-lubricant. Ductile can be flame or induction hardened as well as deep hardened.
Ductile bars are produced with sufficient stock on the outside diameter to ensure clean-up at the nominal dimension.
- Excellent machinability
- Optimal impact strengths
- Optimal fatigue properties
- Optimal electrical conductivity
- High magnetic permeability
Packages longer than 44 inches may have additional freight charges.
| 1-9 | $10.93 |
| 10-19 | $7.28 |
| 20-39 | $5.46 |
| 40+ | $4.85 |
O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.
70 Durometer | Buna-N Rubber Material | 4 1/8 in Nominal Inner Diameter | 1/8 in Cross Section | O-Ring
Features
- Pressure range varies according to diametral clearance
- Temperature range of -40 °F to -240 °F
MCPO-110 has a 110 mm diameter with Standard Chrome. The base material is 1045 Carbon Steel with a yield strength of 75,000 psi.
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
- Extremely smooth surface finish
- Excellent wear and corrosion resistance
- Good strength and impact properties
- Good machinability
- Reasonable weldability
- Fair response to normal heat treating and induction hardening practices
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $29.26 |
| 15-29 | $20.92 |
| 30-59 | $18.29 |
| 60-119 | $14.63 |
| 120+ | $13.31 |
O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.
70 Durometer | Buna-N Rubber Material | 1 5/8 in Nominal Inner Diameter | 1/16 in Cross Section | O-Ring
Features
- Pressure range varies according to diametral clearance
- Temperature range of -40 °F to -240 °F
US-80NBR-1×1-5/16×5/32
