Search Results

.750 – 16 3000 PSI ORB PORTS #8

Cast Iron Rod Clevis Mount with a 1.25 in – 12 TPI threaded end and a 1.375 in pin hole.

Clevis mounts help maintain alignment and protect the cylinder from side load. Mounts attach to threaded stud ends, pivot holes, or bolt holes on the cylinder. Can be used with hydraulic cylinders with standard bore sizes.

HT-2000X1500 has a wall thickness of 0.25 in. The ID is 1.5 in and the OD is 2 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.

Packages longer than 44 inches may have additional freight charges.

HT-2750X2250 has a wall thickness of 0.25 in. The ID is 2.25 in and the OD is 2.75 in. The material is DOM 1026 Steel – ST52.3 and has been stress-relieved and annealed.

Packages longer than 44 inches may have additional freight charges.

Utilizing a sturdy metal case, these wipers are molded from the same high performance urethane used in our Heavy Duty U-seals. Built for severe service, these wipers are capable of surviving hostile environments.

92A Durometer | Urethane Material | 3 in Nominal Inner Diameter

Features

• Used in Heavy Duty U-seals
• Capable of surviving hostile environments
• Molded from the high performance urethane

MHT-70 X 3.50 has a wall thickness of 9.5 mm. The ID is 70 mm and the OD is 89 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.

Packages longer than 44 inches may have additional freight charges.

CIHT6250X6000 has a wall thickness of 0.125 in. The ID is 6 in and the OD is 6.25 in. The material is 1026 Carbon Steel with chrome plating on the Inside Surface.

Packages longer than 44 inches may have additional freight charges.

TSS, 4 X 1/2 Wear Ring CT

Cast Iron Rod Clevis Mount with a 1.875 in – 12 TPI threaded end and a 2 in pin hole.

Clevis mounts help maintain alignment and protect the cylinder from side load. Mounts attach to threaded stud ends, pivot holes, or bolt holes on the cylinder. Can be used with hydraulic cylinders with standard bore sizes.

65mm induction hardened chrome shafting. The base material is 1045/1050 Carbon Steel with 0.0005 in (0.0127mm minimum)-thick chrome plating and a case depth of 0.05 in (1.27 mm).

Induction Hardened Chrome is typically used in abrasive envrionments where the cylinder is exposed to rocks or heavy debris. Also used to machine clevis pins.

• Greater strength
• Better resistance to mechanical damage

Packages longer than 44 inches may have additional freight charges.