Search Results
Filter Your Search
Shop by Category
Cast Iron Rod Clevis Mount with a 1.875 in – 12 TPI threaded end and a 2 in pin hole.
Clevis mounts help maintain alignment and protect the cylinder from side load. Mounts attach to threaded stud ends, pivot holes, or bolt holes on the cylinder. Can be used with hydraulic cylinders with standard bore sizes.
HT-3250X2750 has a wall thickness of 0.25 in. The ID is 2.75 in and the OD is 3.25 in. The material is DOM 1026 Steel – ST52.3 and has been stress-relieved and annealed.
Packages longer than 44 inches may have additional freight charges.
1-14 | $5.33 |
15-59 | $4.58 |
60-104 | $4.00 |
105-149 | $3.55 |
150+ | $3.20 |
HT-1875X1500 has a wall thickness of 0.1875 in. The ID is 1.5 in and the OD is 1.875 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Packages longer than 44 inches may have additional freight charges.
1-14 | $4.66 |
15-59 | $3.50 |
60+ | $2.80 |
Suffix “V” designates fluorocarbon material,“N” designates nitrile material, and “HT” designates high temperature urethane.
90A Durometer | Urethane Material | 2 in Nominal Inner Diameter
Features
- Urethane Wiper Ring
- Min. Temperature Range of ‘-40 °F; N: -40°; V: -20 °F; HT: -40 °F
- Max. Temperature Range of 200 °F; N: 225 °F; V: 350 °F; HT: 225 °F
MHT-100X125 has a wall thickness of 12.5 mm. The ID is 100 mm and the OD is 125 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Packages longer than 44 inches may have additional freight charges.
1-14 | $13.88 |
15-44 | $10.77 |
45-104 | $9.70 |
105+ | $8.83 |
SS17-4/CPO-1000 has a 1 in diameter. The material is 17-4 Stainless Steel, H1150 with Standard Chrome on the exterior.
Commonly used in offshore cranes, marine cylinders, and marine steering cylinders.
- Highest level of corrosion resistance
Packages longer than 44 inches may have additional freight charges.
1-14 | $4.68 |
15-44 | $4.02 |
45-89 | $3.51 |
90-104 | $3.12 |
105+ | $2.81 |
.5625 – 18 3000 PSI ORB PORTS #6
O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.
70 Durometer | Buna-N Rubber Material | 1 3/16 in Nominal Inner Diameter | 1/8 in Cross Section | O-Ring
Features
- Pressure range varies according to diametral clearance
- Temperature range of -40 °F to -240 °F
O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.
70 Durometer | Buna-N Rubber Material | 1 1/4 in Nominal Inner Diameter | 3/32 in Cross Section | O-Ring
Features
- Pressure range varies according to diametral clearance
- Temperature range of -40 °F to -240 °F