Snap-in Wipers for Sale | CRC Distribution
Search in Category
Search Filters
-
inch x
Filter Your Search
Shop by Category
STXE wipers are designed to retrofit the standard ST wiper groove while providing superior performance. The o-ring energizer limits dirt intrusion around the OD of the wiper. The energizer also makes this wiper more effective in applications with severe side deflections.
Urethane Material | 4 in Nominal Inner Diameter
Features
- Designed to retrofit the standard ST wiper groove
- O-ring energizer limits dirt intrusion around the OD of the wiper
Wipers are installed in hydraulic cylinders to prevent dirt, dust, and moisture from entering the cylinder as they retract back into the system. A hydraulic wiper prevents contamination that could damage wear rings, seals, and other cylinder components.
Buna-N Material | 1 in Nominal Inner Diameter
Features
- Installed in hydraulic cylinders to prevent dirt, dust, and moistures
- Hydraulic wiper prevents contamination that could damage wear rings, seals, and other cylinder components
AN wipers are ideal for light duty and pneumatic applications. Its main purpose is to prevent dirt and contaminants from entering the hydraulic or pneumatic systems. Suffix “SH” designates slotted heel design, “V” designates fluorocarbon material, and “B” designates carboxilated nitrile material.
90A Durometer | Urethane Material | 2 1/8 in Nominal Inner Diameter
Features
- Flexible, snap-in design for easy installation into closed housings
- Low compression set
AN wipers are ideal for light duty and pneumatic applications. Its main purpose is to prevent dirt and contaminants from entering the hydraulic or pneumatic systems. Suffix “SH” designates slotted heel design, “V” designates fluorocarbon material, and “B” designates carboxilated nitrile material.
90A Durometer | Urethane Material | 3 1/8 in Nominal Inner Diameter
Features
- Flexible, snap-in design for easy installation into closed housings
- Low compression set
Suffix “N” designates nitrile material.
90A Durometer | Urethane Material | 1 1/2 in Nominal Inner Diameter
Features
- Urethane Wiper Ring
- Temperature range of -40 °F to 200 °F
Style ST wiper rings are precision molded from 90A durometer urethane. Flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications. “V” tagged wipers are constructed of fluorocarbon.
90A Durometer | Urethane Material | 1 1/4 in Nominal Inner Diameter
Features
- Flexible enough to snap into a groove
- Wipers are constructed of fluorocarbon
Wipers are installed in hydraulic cylinders to prevent dirt, dust, and moisture from entering the cylinder as they retract back into the system. A hydraulic wiper prevents contamination that could damage wear rings, seals, and other cylinder components.
90A Durometer | Urethane Material | 1 3/8 in Nominal Inner Diameter
Features
- Installed in hydraulic cylinders to prevent dirt, dust, and moistures
- Hydraulic wiper prevents contamination that could damage wear rings, seals, and other cylinder components
Wipers are installed in hydraulic cylinders to prevent dirt, dust, and moisture from entering the cylinder as they retract back into the system. A hydraulic wiper prevents contamination that could damage wear rings, seals, and other cylinder components.
90A Durometer | Urethane Material | 2 1/2 in Nominal Inner Diameter
Features
- Installed in hydraulic cylinders to prevent dirt, dust, and moistures
- Hydraulic wiper prevents contamination that could damage wear rings, seals, and other cylinder components
AN wipers are ideal for light duty and pneumatic applications. Its main purpose is to prevent dirt and contaminants from entering the hydraulic or pneumatic systems. Suffix “SH” designates slotted heel design, “V” designates fluorocarbon material, and “B” designates carboxilated nitrile material.
90A Durometer | Urethane Material | 5 1/4 in Nominal Inner Diameter
Features
- Flexible, snap-in design for easy installation into closed housings
- Low compression set