Snap-in Wipers for Sale | CRC Distribution

Suffix “V” designates fluorocarbon material,“N” designates nitrile material, and “HT” designates high temperature urethane.

90A Durometer | Urethane Material | 2 in Nominal Inner Diameter

Features

• Urethane Wiper Ring
• Min. Temperature Range of ‘-40 °F; N: -40°; V: -20 °F; HT: -40 °F
• Max. Temperature Range of 200 °F; N: 225 °F; V: 350 °F; HT: 225 °F

Suffix “V” designates fluorocarbon material,“N” designates nitrile material, and “HT” designates high temperature urethane.

90A Durometer | Urethane Material | 2 in Nominal Inner Diameter

Features

• Urethane Wiper Ring
• Min. Temperature Range of ‘-40 °F; N: -40°; V: -20 °F; HT: -40 °F
• Max. Temperature Range of 200 °F; N: 225 °F; V: 350 °F; HT: 225 °F

Suffix “V” designates fluorocarbon material,“N” designates nitrile material, and “HT” designates high temperature urethane.

90A Durometer | Urethane Material | 2 in Nominal Inner Diameter

Features

• Urethane Wiper Ring
• Min. Temperature Range of ‘-40 °F; N: -40°; V: -20 °F; HT: -40 °F
• Max. Temperature Range of 200 °F; N: 225 °F; V: 350 °F; HT: 225 °F

Suffix “N” designates nitrile material.

90A Durometer | Urethane Material | 2 in Nominal Inner Diameter

Features

• Urethane Wiper Ring
• Temperature range of -40 °F to 200 °F

Wipers are installed in hydraulic cylinders to prevent dirt, dust, and moisture from entering the cylinder as they retract back into the system. A hydraulic wiper prevents contamination that could damage wear rings, seals, and other cylinder components.

90A Durometer | Urethane Material | 2 in Nominal Inner Diameter

Features

• Installed in hydraulic cylinders to prevent dirt, dust, and moistures
• Hydraulic wiper prevents contamination that could damage wear rings, seals, and other cylinder components

The Hallite 820 single-lipped, snap-in rod wiper is designed to fit North American D-style housings and has been developed specifically for use in harsher environments with heavy contamination, such as in agriculture, off-highway, and forestry equipment. These wipers include a dust lip to prevent contaminates from entering through the groove. They also have a ribbed inside diameter for low friction operation and to prevent pressure traps between the wiper and rod seal.

93A Durometer | Urethane Material | 2 in Nominal Inner Diameter

Features

• Umbrella Wiper Technology™
• Reducing corrosion and preventing the ingress of contamination into the wiper housing groove and hydraulic cylinder gland which will result in increased system life.
• Moulded ribs on the internal diameter
• Easy to install without the use of special tooling
• Normally specified for harsh environments

Wipers are installed in hydraulic cylinders to prevent dirt, dust, and moisture from entering the cylinder as they retract back into the system. A hydraulic wiper prevents contamination that could damage wear rings, seals, and other cylinder components.

Buna-N Material | 1 7/8 in Nominal Inner Diameter

Features

• Installed in hydraulic cylinders to prevent dirt, dust, and moistures
• Hydraulic wiper prevents contamination that could damage wear rings, seals, and other cylinder components