Search Results

1 inch packing pusher installation tool that allows each ring of packing to be properly seated in the stuffing box.

Each pusher set contains a short pusher (narrow width) and a long pusher (wide width). Both are 48 inches in length.

Seat-It will allow the installer to seat each packing ring so that it will radially expand and contribute to the sealing load resulting in better control of external leakage and reduced sleeve wear.

• Increase Life of Packing
• Increase Packing Performance
• Decrease Energy Costs
• Easy installation
• Resusable

1 inch 219 braided packing.

219 flax packing is constructed with a square braid, impregnated throughout with a pure PTFE dispersion, which acts as a surface leveler and fills in voids in the packing. The PTFE prevents wicking, and forms a protective shield around the flax fibers.

Recommended for brine, cold water, and cold oil and high shaft speeds. 219 flax packing is used on hydraulic rams, accumulators, reciprocating and rotary shafts, plungers, and stern tubes.

219 flax packing is suitable for shaft speeds up to 1885 fpm. The max temperature is 220°F / 104°C and the pH range is 5-9.

The approximate yield for 219-1 is 1.8 ft/lb.

1 inch ML2001 braided packing.

ML2001 is a flexible braided graphite packing style that is constructed with pure homogenous graphite bonded to a carrier for strength and thermal stability. It has no added lubricants or binders to cook out or become brittle.

Recommended for rotating shafts where high speeds and thermal conductivity are required, including applications with unlimited shaft speeds.

ML2001 is suitable for shaft speeds up to Unlimited. The max temperature is 1200°F/649°C (in steam) and 850°F/454°C (in oxidizing conditions) and the pH range is 0-14 except in strong oxidizers.

The approximate yield for ML2001-1 is 2.2 ft/lb.

1 inch ML2225 braided packing.

ML2225 is saturated and sealed with PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding. To assure good break-in characteristics, a special high-temperature synthetic lubricant is added.

ML2225 braided packing is a great general service option for rotary and reciprocating pumps, and agitators. Recommended for brine, caustics, mild acids, difficult chemicals, air, gases, solvents, oils, and general chemical plant applications.

Suitable for shaft speeds up to 1850 fpm. The max temperature is 500°F / 260°C and the pH range is 3-11.

The approximate yield for ML2225-1 is 1.6 ft/lb.

1 inch ML2235 braided packing.

ML2235 has prelubricated PTFE fibers to provide a softer, more flexible packing. The prelubrication offers improved peripheral speed characteristics and exothermic properties, unlike other PTFE fluorocarbon filament packing. ML2235 packing does not glaze in higher speed applications. It is inert and virtually indestructible with a low coefficient of friction and high compressive strength.

ML2235 braided packing is recommended for the most severe services. It is suitable for all oxidizers and corrosives except for molten alkali metals.

ML2235 is suitable for shaft speeds up to 1200 fpm. The max temperature is 500°F / 260°C and the pH range is 0-14.

The approximate yield for ML2235-1 is 1.4 ft/lb.

• No glazing at high speeds
• High compression strength
• Low coefficient of friction
• Inert and virtually indestrucible

1 inch ML2238 braided packing.

ML2238 is a specially treated PTFE packing for high-speed applications. Other PTFE filaments glaze or harden because of frictional heat due to high speeds and thermal expansion.

ML2238 braided packing is recommended for the most severe services. Can be used with all oxidizers and corrosives except for molten alkali metals.

ML2238 is suitable for shaft speeds up to 1885 fpm. The max temperature is 500°F / 260°C and the pH range is 0-14.

The approximate yield for ML2238-1 is 1.3 ft/lb.

1 inch ML2240 braided packing.

ML2240 is a state-of-the-art, ultra high-speed and non-contaminating PTFE white packing. It will not glaze or harden and benefits from very low thermal expansion, making it ideal for any application that requires white packing or food grade packing.

ML2240 braided packing is specifically formulated for mixers, agitators, and pumps with high shaft speeds that require white braided packing.

ML2240 is suitable for shaft speeds up to 3300 fpm. The max temperature is 500°F / 260°C and the pH range is 0-14.

The approximate yield for ML2240-1 is 1.4 ft/lb.

1 inch ML3600 braided packing.

ML3600 is engineered with an expanded PTFE/graphite composite fibers. Finely ground particles of the highest quality graphite are encapsulated in the PTFE matrix to eliminate graphite migration.

ML3600 braided packing is an excellent general service packing for pumps, agitators, and mixers. It is suitable for a wide range of plant applications, including aggressive fluids and high temperatures.

ML3600 is suitable for shaft speeds up to 3600 fpm. The max temperature is 500°F / 260°C and the pH range is 0-14.

The approximate yield for ML3600-1 is 1.5 ft/lb.

1 inch ML4002 braided packing.

ML4002 is made of 100% GFO® fibers with the W. L. Gore seal of approval. It is an excellent, all around packing exhibiting good thermal conductivity characteristics resulting in higher shaft speed and feet-per-minute (fpm) ratings.

Packings containing 100% GFO® fibers give maintenance engineers consistently high-performing general service packing for a wide range of applications. Not for use in food, drug, cosmetic or medical device manufacturing, processing, or packaging operations.

ML4002 is suitable for shaft speeds up to 1885 fpm. The max temperature is 450°F / 232°C and the pH range is 4-10.

The approximate yield for ML4002-1 is 1.6 ft/lb.

1 inch ML402 braided packing.

ML402 features a blend of synthetic fibers treated with specially formulated lubricants with a saxoline base.The lubrication formulation makes the extra difference for this style of packing. The ductile nature of the lubricant added prevents wicking and provides superior sealability. Each strand is individually coated with graphite and receives a final secondary surface coating of graphite after braiding.

ML402 braided packing is recommended for general service on rotary and reciprocating equipment in mild acids, alkalies, steam, brine, and oil.

ML402 is suitable for shaft speeds up to 1885 fpm. The max temperature is 450°F / 232°C and the pH range is 4-10.

The approximate yield for ML402-1 is 2.1 ft/lb.

• Two track braiding style which allows for tight bends while packing knife gate valves.
• Each strand is individually coated with graphite
• The braid is surface coated with graphite