Search Results

1 inch packing pusher installation tool that allows each ring of packing to be properly seated in the stuffing box.

Each pusher set contains a short pusher (narrow width) and a long pusher (wide width). Both are 48 inches in length.

Seat-It will allow the installer to seat each packing ring so that it will radially expand and contribute to the sealing load resulting in better control of external leakage and reduced sleeve wear.

• Increase Life of Packing
• Increase Packing Performance
• Decrease Energy Costs
• Easy installation
• Resusable

1 inch 4461 braided packing.

ML4461 is a high-performing, carbon filament packing treated throughout with PTFE to help prevent color contamination and carbon migration. Each strand of the carbon yarn is treated and impregnated with a PTFE suspensoid, totally encapsulating the packing to prevent carbon filaments from migrating into the system.

ML4461 braided packing is constructed to work best with high temperature and high shaft speed applications. It is recommended for use in demanding applications such as digesters, outlet devices, steam vessels, and top separators. ML4461 can be used in most chemical services, except strong oxidizers.

ML4461 is suitable for shaft speeds up to 3000 fpm. The max temperature is 600°F / 345°C and the pH range is 0-14.

The approximate yield for ML4461-1 is 1.6 ft/lb.

Packing rings will not cross-link or fuse in service, allowing for easy removal and elimination of costly spacer rings.

1 inch ML4800 braided packing.

ML4800 is consutrcuted of aramid fibers. Aramid is a hard fiber that forms imperfectly around a shaft, creating gaps that accelrarate leakage. The aramid fibers are treated with PTFE dispersion, which fills and seals the gaps in the packing fibers. After braiding, a PTFE coating is applied and the packing is forced air-dried. ML4800 packing will not wick.

ML4800 braided packing performs well in extremely abrasive environments. It is recommended for caustics, mild acids, chemicals, air, oil, gases, solvents, and general service applications.

ML4800 is suitable for shaft speeds up to 1900 fpm. The max temperature is 500°F / 260°C and the pH range is 3-11.

The approximate yield for ML4800-1 is 1.5 ft/lb.

1 inch ML6225 braided packing.

ML6225 is a proprietary blend of non-asbestos TEK-PRO yarns treated with PTFE throughout the packing. The TEK-PRO yarns retain a greater volume of PTFE dispersion and are more uniformly distributed to provide longer and better sealing plus resistance to chemical attack. A light lubricant is applied under pressure to improve run-in properties.

ML6225 braided packing is recommended for paper mill applications, recovery pumps, chemical applications, and caustic soda. It is an excellent all-around, general service chemical packing. Suitable for rotating and reciprocating pump and valve equipment, mixers, and agitators.

ML6225 is suitable for shaft speeds up to 1885 fpm. The max temperature is 500°F / 260°C and the pH range is 3-12.

The approximate yield for ML6225-1 is 1.4 ft/lb.

The special impregnation procedure fills all voids throughout the body of the packing with PTFE dispersion. A superior general purpose packing for tougher-than-normal applications.

A proprietary blend of non-asbestos TEK-PRO yarns treated with PTFE throughout the packing. The PTFE suspensoin thoroughly seals and fills all voids providing better resistance to chemical attack. A light lubricant is applied under pressure to improve run-in properties.

The TEK-PRO yarns retain a greater volume of PTFE dispersion and are more uniformly distributed to provide longer and better sealing.