Search Results

O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.

70A Durometer | Nitrile Material | 110 MM Nominal Inner Diameter | 3 MM Cross Section | O-Ring

Features

• Chemical resistance
• Temperature range of -40 °F to 220 °F

O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.

70A Durometer | Nitrile Material | 110 MM Nominal Inner Diameter | 5 MM Cross Section | O-Ring

Features

• Chemical resistance
• Temperature range of -40 °F to 220 °F

Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes to protect the rod seal.

70A Durometer | Filled PTFE Buffer Material | 110 MM Nominal Inner Diameter | Buffer Seal

O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.

70A Durometer | Nitrile Material | 110 MM Nominal Inner Diameter | 2.5 MM Cross Section | O-Ring

Features

• Chemical resistance
• Temperature range of -40 °F to 220 °F

Molded in bronze-filled PTFE with an FKM energizer, this seal is used to protect the primary seal from damage caused by pressure spikes and excessive heat build up.

Bronze PTFE Buffer Material | 110 MM Nominal Inner Diameter | Buffer Seal

Commonly used with metric o-rings, these back-up rings are made of virgin PTFE unless suffix specifies otherwise.

PTFE Material | 110 MM Nominal Inner Diameter | 5 MM Cross Section | Backup Ring

Features

• High strength and abrasion resistance
• Wide temperature range
• Chemical resistance
• Low friction
• Easy installation

Molded in nitrile with a steel case, this seal is double cased and used to exclude contaminants from cylinder link pins.

Urethane Material | 110 MM Nominal Inner Diameter | Dust Seal

Molded in urethane, this wiper features a double lip which prevents fluid that seeps by the rod seal from exiting the cylinder.

Urethane Material | 110 MM Inner Diameter | Wiper

Molded in a tough urethane, this seal employs an additional lip near the heel. The twin lip design provides stability, friction-reducing lube retention, and some contaminant resistance. VME – Secondary lip is further from heel than standard MRTU. NOTE: E = European Urethane.

Urethane Material | 110 MM Nominal Inner Diameter | Rod U-Seal

Features

• Excellent low temperature performance
• Easy installation

O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.

70A Durometer | Nitrile Material | 110 MM Nominal Inner Diameter | 4 MM Cross Section | O-Ring

Features

• Chemical resistance
• Temperature range of -40 °F to 220 °F