Search Results
Filter Your Search
Category Group
Shop by Category
HT-4500X4000 has a wall thickness of 0.25 in. The ID is 4 in and the OD is 4.5 in. The material is DOM 1026 Steel – ST52.3 and has been stress-relieved and annealed.
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $5.72 |
| 15-59 | $5.00 |
| 60-104 | $4.44 |
| 105-149 | $4.00 |
| 150+ | $3.64 |
Style ST-XL wipers are molded from premium urethane and are direct replacements for Style “ST” or “D” wipers. The outside diameter of the ring has a crush lip providing extra interference in the groove. A bead on the shoulder stops contaminates from entering through the groove. The inside diameter is ribbed to prevent pressure traps between the wiper and rod seal.
94A Durometer | Urethane Material | 2 in Nominal Inner Diameter
Features
- Crush lip to provide extra interference
- Bead on the shoulder to keep contaminants out
- Ribbed ID to prevent pressure traps
HT-3000X2500 has a wall thickness of 0.25 in. The ID is 2.5 in and the OD is 3 in. The material is DOM 1026 Steel – ST52.3 and has been stress-relieved and annealed.
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $4.55 |
| 15-59 | $3.91 |
| 60-104 | $3.41 |
| 105-149 | $3.03 |
| 150+ | $2.73 |
Parback® backup ring with a curved cross-section.
Parbaks are contoured on one face to minimize distortion of the o-ring when under pressure. Parbaks should be installed with the contoured face against the o-ring, but reversal does no harm.
90A Durometer | Buna-N Rubber Material | 4 1/8 in Nominal Inner Diameter | 1/8 in Cross Section | Backup Ring
Features
- Excellent extrusion resistance
- Easily stretched for installation
- Lubrication is enhanced by rubber which absorbs system fluid and does not plate out on rubbing surfaces
O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.
70 Durometer | Buna-N Rubber Material | 2 1/4 in Nominal Inner Diameter | 1/8 in Cross Section | O-Ring
Features
- Pressure range varies according to diametral clearance
- Temperature range of -40 °F to -240 °F
SS17-4/CPO-2000 has a 2 in diameter. The material is 17-4 Stainless Steel with Standard Chrome on the exterior.
Commonly used in offshore cranes, marine cylinders, and marine steering cylinders.
- Highest level of corrosion resistance
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $14.63 |
| 15-74 | $12.79 |
| 75-89 | $11.36 |
| 90-104 | $10.23 |
| 105+ | $9.31 |
MCPO-40 has a 40 mm diameter with Standard Chrome. The base material is 1045 Carbon Steel with a yield strength of 75,000 psi.
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
- Extremely smooth surface finish
- Excellent wear and corrosion resistance
- Good strength and impact properties
- Good machinability
- Reasonable weldability
- Fair response to normal heat treating and induction hardening practices
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $6.33 |
| 15-29 | $4.21 |
| 30-89 | $3.16 |
| 90-134 | $2.81 |
| 135+ | $2.53 |
ALUM-6000 has a 6 in diameter. The material is 6061 Aluminum T6
6061 Aluminum T6 is suitable for pneumatic cylinder rods, pistons, and head glands.
The T6 refers to the temper or degree of hardness. T6 has been solution heat treated and artificially aged to provide the maximum yield strength for a 6061 aluminum alloy.
- Heat treated and aged for increased strength
- Easily formed
- Weldable
- Corrosion resistant
Packages longer than 44 inches may have additional freight charges.
MCPO-50 has a 50 mm diameter with Standard Chrome. The base material is 1045 Carbon Steel with a yield strength of 75,000 psi.
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
- Extremely smooth surface finish
- Excellent wear and corrosion resistance
- Good strength and impact properties
- Good machinability
- Reasonable weldability
- Fair response to normal heat treating and induction hardening practices
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $9.46 |
| 15-29 | $6.30 |
| 30-89 | $4.73 |
| 90-134 | $4.20 |
| 135+ | $3.78 |
O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.
70 Durometer | Buna-N Rubber Material | 2 in Nominal Inner Diameter | 1/8 in Cross Section | O-Ring
Features
- Pressure range varies according to diametral clearance
- Temperature range of -40 °F to -240 °F
