Search Results
Filter Your Search
Shop by Category
MCPO-45 has a 45 mm diameter with Standard Chrome. The base material is 1045 Carbon Steel with a yield strength of 75,000 psi.
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
- Extremely smooth surface finish
- Excellent wear and corrosion resistance
- Good strength and impact properties
- Good machinability
- Reasonable weldability
- Fair response to normal heat treating and induction hardening practices
Packages longer than 44 inches may have additional freight charges.
1-14 | $7.70 |
15-29 | $5.13 |
30-89 | $3.85 |
90-134 | $3.42 |
135+ | $3.08 |
2 in induction hardened chrome shafting. The base material is 1045/1050 Carbon Steel with 0.0005 in (0.0127mm minimum)-thick chrome plating and a case depth of 0.05 in (1.27 mm).
Induction Hardened Chrome is typically used in abrasive envrionments where the cylinder is exposed to rocks or heavy debris. Also used to machine clevis pins.
- Greater strength
- Better resistance to mechanical damage
Packages longer than 44 inches may have additional freight charges.
1-29 | $7.12 |
30-74 | $5.09 |
75-134 | $3.95 |
135-287 | $3.56 |
288+ | $3.24 |
HT-3375X3000 has a wall thickness of 0.1875 in. The ID is 3 in and the OD is 3.375 in. The material is DOM 1026 Steel – ST52.3 and has been stress-relieved and annealed.
Packages longer than 44 inches may have additional freight charges.
1-14 | $4.34 |
15-59 | $3.72 |
60-104 | $3.26 |
105-149 | $2.89 |
150+ | $2.60 |
CPO-3000 has a 3 in diameter with Standard Chrome. The base material is 1045 Carbon Steel with a yield strength of 75,000 psi.
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
- Extremely smooth surface finish
- Excellent wear and corrosion resistance
- Good strength and impact properties
- Good machinability
- Reasonable weldability
- Fair response to normal heat treating and induction hardening practices
Packages longer than 44 inches may have additional freight charges.
1-29 | $14.39 |
30-59 | $10.29 |
60-119 | $7.99 |
120-287 | $7.19 |
288+ | $6.55 |
1.5 in induction hardened chrome shafting. The base material is 1045/1050 Carbon Steel with 0.0005 in (0.0127mm minimum)-thick chrome plating and a case depth of 0.05 in (1.27 mm).
Induction Hardened Chrome is typically used in abrasive envrionments where the cylinder is exposed to rocks or heavy debris. Also used to machine clevis pins.
- Greater strength
- Better resistance to mechanical damage
Packages longer than 44 inches may have additional freight charges.
1-14 | $6.00 |
15-29 | $4.00 |
30-89 | $2.86 |
90-134 | $2.22 |
135+ | $2.00 |
CPO-1125 has a 1.125 in diameter with Standard Chrome. The base material is 1045 Carbon Steel with a yield strength of 75,000 psi.
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
- Extremely smooth surface finish
- Excellent wear and corrosion resistance
- Good strength and impact properties
- Good machinability
- Reasonable weldability
- Fair response to normal heat treating and induction hardening practices
Packages longer than 44 inches may have additional freight charges.
1-14 | $3.02 |
15-29 | $2.01 |
30-89 | $1.44 |
90-134 | $1.12 |
135+ | $1.01 |
MCPO-25 has a 25 mm diameter with Standard Chrome. The base material is 1045 Carbon Steel with a yield strength of 75,000 psi.
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
- Extremely smooth surface finish
- Excellent wear and corrosion resistance
- Good strength and impact properties
- Good machinability
- Reasonable weldability
- Fair response to normal heat treating and induction hardening practices
Packages longer than 44 inches may have additional freight charges.
1-14 | $3.12 |
15-29 | $2.08 |
30-89 | $1.56 |
90-134 | $1.39 |
135+ | $1.25 |
2.5 in induction hardened chrome shafting. The base material is 1045/1050 Carbon Steel with 0.0005 in (0.0127mm minimum)-thick chrome plating and a case depth of 0.05 in (1.27 mm).
Induction Hardened Chrome is typically used in abrasive envrionments where the cylinder is exposed to rocks or heavy debris. Also used to machine clevis pins.
- Greater strength
- Better resistance to mechanical damage
Packages longer than 44 inches may have additional freight charges.
1-29 | $11.12 |
30-74 | $7.95 |
75-134 | $6.17 |
135-287 | $5.56 |
288+ | $5.06 |
CPO-3500 has a 3.5 in diameter with Standard Chrome. The base material is 1045 Carbon Steel with a yield strength of 75,000 psi.
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
- Extremely smooth surface finish
- Excellent wear and corrosion resistance
- Good strength and impact properties
- Good machinability
- Reasonable weldability
- Fair response to normal heat treating and induction hardening practices
Packages longer than 44 inches may have additional freight charges.
1-29 | $19.64 |
30-59 | $14.04 |
60-119 | $10.90 |
120-287 | $9.82 |
288+ | $8.94 |