Search Results
Filter Your Search
Category Group
Shop by Category
CPO-3000 has a 3 in diameter with Standard Chrome. The base material is 1045 Carbon Steel with a yield strength of 75,000 psi.
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
- Extremely smooth surface finish
- Excellent wear and corrosion resistance
- Good strength and impact properties
- Good machinability
- Reasonable weldability
- Fair response to normal heat treating and induction hardening practices
Packages longer than 44 inches may have additional freight charges.
| 1-29 | $14.39 |
| 30-59 | $10.29 |
| 60-119 | $7.99 |
| 120-287 | $7.19 |
| 288+ | $6.55 |
HT-3375X3000 has a wall thickness of 0.1875 in. The ID is 3 in and the OD is 3.375 in. The material is DOM 1026 Steel – ST52.3 and has been stress-relieved and annealed.
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $4.34 |
| 15-59 | $3.72 |
| 60-104 | $3.26 |
| 105-149 | $2.89 |
| 150+ | $2.60 |
1.5 in induction hardened chrome shafting. The base material is 1045/1050 Carbon Steel with 0.0005 in (0.0127mm minimum)-thick chrome plating and a case depth of 0.05 in (1.27 mm).
Induction Hardened Chrome is typically used in abrasive envrionments where the cylinder is exposed to rocks or heavy debris. Also used to machine clevis pins.
- Greater strength
- Better resistance to mechanical damage
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $6.00 |
| 15-29 | $4.00 |
| 30-89 | $2.86 |
| 90-134 | $2.22 |
| 135+ | $2.00 |
CPO-1125 has a 1.125 in diameter with Standard Chrome. The base material is 1045 Carbon Steel with a yield strength of 75,000 psi.
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
- Extremely smooth surface finish
- Excellent wear and corrosion resistance
- Good strength and impact properties
- Good machinability
- Reasonable weldability
- Fair response to normal heat treating and induction hardening practices
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $3.02 |
| 15-29 | $2.01 |
| 30-89 | $1.44 |
| 90-134 | $1.12 |
| 135+ | $1.01 |
MCPO-25 has a 25 mm diameter with Standard Chrome. The base material is 1045 Carbon Steel with a yield strength of 75,000 psi.
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
- Extremely smooth surface finish
- Excellent wear and corrosion resistance
- Good strength and impact properties
- Good machinability
- Reasonable weldability
- Fair response to normal heat treating and induction hardening practices
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $3.12 |
| 15-29 | $2.08 |
| 30-89 | $1.56 |
| 90-134 | $1.39 |
| 135+ | $1.25 |
2.5 in induction hardened chrome shafting. The base material is 1045/1050 Carbon Steel with 0.0005 in (0.0127mm minimum)-thick chrome plating and a case depth of 0.05 in (1.27 mm).
Induction Hardened Chrome is typically used in abrasive envrionments where the cylinder is exposed to rocks or heavy debris. Also used to machine clevis pins.
- Greater strength
- Better resistance to mechanical damage
Packages longer than 44 inches may have additional freight charges.
| 1-29 | $11.12 |
| 30-74 | $7.95 |
| 75-134 | $6.17 |
| 135-287 | $5.56 |
| 288+ | $5.06 |
O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.
70 Durometer | Buna-N Rubber Material | 3 5/8 in Nominal Inner Diameter | 3/16 in Cross Section | O-Ring
Features
- Pressure range varies according to diametral clearance
- Temperature range of -40 °F to -240 °F
CPO-3500 has a 3.5 in diameter with Standard Chrome. The base material is 1045 Carbon Steel with a yield strength of 75,000 psi.
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
- Extremely smooth surface finish
- Excellent wear and corrosion resistance
- Good strength and impact properties
- Good machinability
- Reasonable weldability
- Fair response to normal heat treating and induction hardening practices
Packages longer than 44 inches may have additional freight charges.
| 1-29 | $19.64 |
| 30-59 | $14.04 |
| 60-119 | $10.90 |
| 120-287 | $9.82 |
| 288+ | $8.94 |
*
10 in Hot Finished 1018 Carbon Steel*
round bar. Material can be cut to any size.
Suitable for shafting and applications that do not require the greater strength of high carbon and alloy steels.
- Good case hardening properties
- Fair machinability
- Readily brazed and welded
Packages longer than 44 inches may have additional freight charges.
| 1-4 | $88.61 |
| 5-9 | $76.10 |
| 10-14 | $66.53 |
| 15+ | $59.07 |
