Search Results
Filter Your Search
Category Group
Shop by Category
Molded in urethane, this wiper is flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications.
Urethane Material | 30 MM Inner Diameter | Wiper
CPO-4000 has a 4 in diameter with Standard Chrome. The base material is 1045 Carbon Steel with a yield strength of 75,000 psi.
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges. All rod and tubing are cut 0.125" to 0.250" over the requested length to ensure adequate finish stock. No material will be cut below the ordered length (−0.000").
Utilizing a sturdy metal case, these wipers are molded from the same high performance urethane used in our Heavy Duty U-seals. Built for severe service, these wipers are capable of surviving hostile environments.
92A Durometer | Urethane Material | 1 1/4 in Nominal Inner Diameter
Molded in urethane, this wiper is flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications.
Urethane Material | 40 MM Inner Diameter | Wiper
This 2 in ID x 2.5 in OD honed tube is commonly used as cylinder barrel stock for mobile and industrial hydraulic cylinders, offering the honed ID finish needed for reliable piston seal performance without additional machining.
HT-2500X2000 has a wall thickness of 0.25 in. The ID is 2 in and the OD is 2.5 in. The material is 1026 Carbon Steel and has been stress-relieved and annealed. Available cut to your specified length, with fast shipping from our Robertsdale, AL facility.
2 in ID x 2.5 in OD honed tube, 0.25 in wall, 1026 Carbon Steel. Cut to length.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges. All rod and tubing are cut 0.125" to 0.250" over the requested length to ensure adequate finish stock. No material will be cut below the ordered length (−0.000").
This 2.5 in ID x 2.875 in OD honed tube is commonly used as cylinder barrel stock for mobile and industrial hydraulic cylinders, offering the honed ID finish needed for reliable piston seal performance without additional machining.
HT-2875X2500 has a wall thickness of 0.1875 in. The ID is 2.5 in and the OD is 2.875 in. The material is 1026 Carbon Steel and has been stress-relieved and annealed. Available cut to your specified length, with fast shipping from our Robertsdale, AL facility.
2.5 in ID x 2.875 in OD honed tube, 0.1875 in wall, 1026 Carbon Steel. Cut to length.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges. All rod and tubing are cut 0.125" to 0.250" over the requested length to ensure adequate finish stock. No material will be cut below the ordered length (−0.000").
70mm induction hardened chrome shafting.
The base material is 1045/1050 Carbon Steel with 0.0005 in (0.0127mm minimum)-thick chrome plating and a case depth of 0.05 in (1.27 mm).
Induction Hardened Chrome is typically used in abrasive envrionments where the cylinder is exposed to rocks or heavy debris. Also used to machine clevis pins.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges. All rod and tubing are cut 0.125" to 0.250" over the requested length to ensure adequate finish stock. No material will be cut below the ordered length (−0.000").
This 5 in ID x 5.75 in OD honed tube is built for heavy-duty and large-bore hydraulic cylinder applications like mining, construction, and industrial press cylinders where wall strength and a consistent honed bore are critical.
HT-5750X5000 has a wall thickness of 0.375 in. The ID is 5 in and the OD is 5.75 in. The material is 1026 Carbon Steel and has been stress-relieved and annealed. Available cut to your specified length, with fast shipping from our Robertsdale, AL facility.
5 in ID x 5.75 in OD honed tube, 0.375 in wall, 1026 Carbon Steel. Cut to length.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges. All rod and tubing are cut 0.125" to 0.250" over the requested length to ensure adequate finish stock. No material will be cut below the ordered length (−0.000").
This 4 in ID x 4.625 in OD honed tube is commonly used as cylinder barrel stock for mobile and industrial hydraulic cylinders, offering the honed ID finish needed for reliable piston seal performance without additional machining.
HT-4625X4000 has a wall thickness of 0.3125 in. The ID is 4 in and the OD is 4.625 in. The material is 1026 Carbon Steel and has been stress-relieved and annealed. Available cut to your specified length, with fast shipping from our Robertsdale, AL facility.
4 in ID x 4.625 in OD honed tube, 0.3125 in wall, 1026 Carbon Steel. Cut to length.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges. All rod and tubing are cut 0.125" to 0.250" over the requested length to ensure adequate finish stock. No material will be cut below the ordered length (−0.000").
