2.125 in Induction Hardened Chrome Shafting
View Related Items
The PA 533 material is heat stabilised 33% glass reinforced nylon 66, which offers excellent bearing properties.
Compatible with hydraulic and lubricating oils. The PA 533 material is not recommended for use in water based fluids (HFA) or where significant water is present, due to the swell of the nylon.
IHCP-2125 Induction Hardened Chrome Shafting
2.125 in induction hardened chrome shafting. The base material is 1045/1050 Carbon Steel with 0.0005 in (0.0127mm minimum)-thick chrome plating and a case depth of 0.05 in (1.27 mm).
1-29 | $10.36 |
30-74 | $7.41 |
75-134 | $5.75 |
135-287 | $5.18 |
288+ | $4.71 |
Induction Hardened Chrome is typically used in abrasive envrionments where the cylinder is exposed to rocks or heavy debris. Also used to machine clevis pins.
- Greater strength
- Better resistance to mechanical damage
Packages longer than 44 inches may have additional freight charges.
Item Specifications
-
0.05 in (1.27 mm)
-
Induction Hardened Chrome
-
0.0005 in (0.0127mm minimum)
-
10%
-
Rc 68-72
-
1045/1050 Carbon Steel
-
ASTM A311, Class B
-
2.125 in
-
288 in
-
0.006 in TIR per ft
-
Ra 12 max
-
115,000 psi
-
inch
-
100,000 psi
-
1.01 lbs per IN
View Related Items
The PA 533 material is heat stabilised 33% glass reinforced nylon 66, which offers excellent bearing properties.
Compatible with hydraulic and lubricating oils. The PA 533 material is not recommended for use in water based fluids (HFA) or where significant water is present, due to the swell of the nylon.