3.75 in x 4.5 in x 0.375 in Honed Tube - 1026 Carbon Steel
View Related Items
Head cap size is determined based on the bending stress.
A static seal or o-ring is used in between the head cap and barrel (except welded construction).
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
2.000 IHCP C1045/C1050/50-100K
HT-4500X3750 Honed Tube
HT-4500X3750 has a wall thickness of 0.375 in. The ID is 3.75 in and the OD is 4.5 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
| 1-14 | $6.88 |
| 15-59 | $6.02 |
| 60-104 | $5.34 |
| 105-149 | $4.81 |
| 150+ | $4.38 |
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges. All rod and tubing are cut 0.125" to 0.250" over the requested length to ensure adequate finish stock. No material will be cut below the ordered length (−0.000").
Export To PDF
Item Specifications
-
3.75 in
-
1026 Carbon Steel
-
4.5 in
-
ASTM A513 Type 5, ST 52.3
-
288 in
-
0.375 in
-
1.38 lbs per IN
View Related Items
Head cap size is determined based on the bending stress.
A static seal or o-ring is used in between the head cap and barrel (except welded construction).
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
2.000 IHCP C1045/C1050/50-100K
