Glass-filled Polyamide Wear Ring
View Related Items
94A Durometer | Urethane Material | 2 3/8 in Nominal Inner Diameter
Designed to have interference in the seal housing groove and has a secondary lip. The secondary sealing lip located behind the primary sealing lip improves stability of the seal in the gland.
The inner dynamic lip is shorter and more robust to improve sealing and compression set characteristics over conventional, symmetrical U-seals.
The seal can be considered for use in heavy-duty applications when used with a suitable full depth back-up ring. The sealing lips are precision trimmed at an angle to give optimal rod sealing performance.
612-262-050 Nylon Wear Ring | 2 3/8 in ID 1/8 in CS
Wear rings provide a hard-wearing surface that protects the cylinder walls and the piston rod from scoring and abrasion. By maintaining alignment and reducing side loads, these rings facilitate smoother piston movement and lower friction levels.
Nylon Material | 2 3/8 in Nominal Inner Diameter | 1/8 in Cross Section | Wear Ring
Features
- Protection Against Wear
- Reduced Friction
- Extended Cylinder Life
- Operational Efficiency
Export To PDF
Item Specifications
-
26000 psi
-
1/8 Inch
-
Hallite
-
Glass-Filled Nylon
-
Nylon
-
275 °F
-
-40 °F
-
1/2 Inch
-
2 3/8 Inch
-
2 5/8 Inch
-
Unlimited
-
16 ft/sec
-
600
-
-40 to +250 F
-
25000 psi
-
inch
-
0.03 lbs per EA
View Related Items
94A Durometer | Urethane Material | 2 3/8 in Nominal Inner Diameter
Designed to have interference in the seal housing groove and has a secondary lip. The secondary sealing lip located behind the primary sealing lip improves stability of the seal in the gland.
The inner dynamic lip is shorter and more robust to improve sealing and compression set characteristics over conventional, symmetrical U-seals.
The seal can be considered for use in heavy-duty applications when used with a suitable full depth back-up ring. The sealing lips are precision trimmed at an angle to give optimal rod sealing performance.
