Browse Categories

Hydraulic Wear Rings

Search in Category

Wear Rings

Filter Your Search

Show Attribute Nominal Inner Diameter
Show Attribute Nominal Outer Diameter

Shop by Category

Loading...
Seals/Wear Rings/Wear Rings 
Viewing Page 1 of 307 (3,068 results)
TSS, 4 X 1/2 Wear Ring CT - GP2C04000-HM803 | CRC Distribution Inc.

TSS, 4 X 1/2 Wear Ring CT

$5.53
/EA
WR-NYL-4X1/2X1/8-C/S - 612-400-050-BC | CRC Distribution Inc.

WR-NYL-4X1/2X1/8-C/S

$12.94
/EA
WR-NYL, 2 1/2 X 3/8 Wear Ring - 612-250-037 | CRC Distribution Inc.

WR-NYL, 2 1/2 X 3/8 Wear Ring

$9.84
/EA

Wear rings provide a hard-wearing surface that protects the cylinder walls and the piston rod from scoring and abrasion. By maintaining alignment and reducing side loads, these rings facilitate smoother piston movement and lower friction levels.

Nylon Material | 3 3/4 in Nominal Inner Diameter | 1/8 in Cross Section | Wear Ring

Features

  • Scarf Cut wear ring
  • Protection Against Wear
  • Reduced Friction
  • Extended Cylinder Life
  • Operational Efficiency

$9.03
/EA
PB12-275-050-SC Powerband | CRC Distribution Inc.

Hercules® Sealing Products is pleased to introduce our new line of PowerbandTM tight tolerance premium wearrings. Manufactured from a highly engineered blend of premium nylon, glass fiber, and PTFE, PowerbandsTM offer a high strength wear-ring for all cylinder applications, including those with minimal lubrication. And, with a Coefficient of Friction nearly 50% lower than our standard product, your cylinders will run smoother and more efficiently than ever. All PowerbandsTM are fully machined with cross-section tolerances of only ±0.001”, chamfered corners, and scarf or angle-cut end gaps. Compared to standard tolerances of ±0.0025”, this tightened tolerance improves the alignment and concentric operation of cylinder rods and pistons. The fully machined chamfered corners will better accommodate cylinder housing grooves, further improving piston and rod alignment. Lastly, the scarf-cut end gap reduces the loss of bearing support that may occur during cylinder side-loading. When combined, these features reduce the tolerance stack-up within the components of the cylinder. As a result, your cylinders will operate more consistently and be capable of operating at higher pressures and higher side loads than with standard wear-ring products. Furthermore, with this improved cylinder operation, your seals will last longer and the life of your cylinder will be extended. PowerbandsTM are currently available in our most popular wear-ring dimensions.

2 1/2 in Nominal Inner Diameter | Powerband

Features

  • PowerbandsTM offer a high strength wear-ring for all cylinder applications
  • Fully machined with cross-section tolerances of only ±0.001
  • Chamfered corners
  • Scarf or angle-cut end gaps

$8.42
/EA

Wear rings provide a hard-wearing surface that protects the cylinder walls and the piston rod from scoring and abrasion. By maintaining alignment and reducing side loads, these rings facilitate smoother piston movement and lower friction levels.

Nylon Material | 2 1/2 in Nominal Inner Diameter | 1/8 in Cross Section | Wear Ring

Features

  • Scarf Cut wear ring
  • Protection Against Wear
  • Reduced Friction
  • Extended Cylinder Life
  • Operational Efficiency

$8.03
/EA
PB12-250-050-SC Powerband | CRC Distribution Inc.

Hercules® Sealing Products is pleased to introduce our new line of PowerbandTM tight tolerance premium wearrings. Manufactured from a highly engineered blend of premium nylon, glass fiber, and PTFE, PowerbandsTM offer a high strength wear-ring for all cylinder applications, including those with minimal lubrication. And, with a Coefficient of Friction nearly 50% lower than our standard product, your cylinders will run smoother and more efficiently than ever. All PowerbandsTM are fully machined with cross-section tolerances of only ±0.001”, chamfered corners, and scarf or angle-cut end gaps. Compared to standard tolerances of ±0.0025”, this tightened tolerance improves the alignment and concentric operation of cylinder rods and pistons. The fully machined chamfered corners will better accommodate cylinder housing grooves, further improving piston and rod alignment. Lastly, the scarf-cut end gap reduces the loss of bearing support that may occur during cylinder side-loading. When combined, these features reduce the tolerance stack-up within the components of the cylinder. As a result, your cylinders will operate more consistently and be capable of operating at higher pressures and higher side loads than with standard wear-ring products. Furthermore, with this improved cylinder operation, your seals will last longer and the life of your cylinder will be extended. PowerbandsTM are currently available in our most popular wear-ring dimensions.

2 1/4 in Nominal Inner Diameter | Powerband

Features

  • PowerbandsTM offer a high strength wear-ring for all cylinder applications
  • Fully machined with cross-section tolerances of only ±0.001
  • Chamfered corners
  • Scarf or angle-cut end gaps

$8.35
/EA

Wear rings provide a hard-wearing surface that protects the cylinder walls and the piston rod from scoring and abrasion. By maintaining alignment and reducing side loads, these rings facilitate smoother piston movement and lower friction levels.

Nylon Material | 3 in Nominal Inner Diameter | 1/8 in Cross Section | Wear Ring

Features

  • Scarf Cut wear ring
  • Protection Against Wear
  • Reduced Friction
  • Extended Cylinder Life
  • Operational Efficiency

$7.08
/EA

Fabricated from fine woven fabric and phenolic resins, this wear ring is strong yet light weight with an excellent wear rate.

Phenolic Material | 95 MM Nominal Inner Diameter | Wear Ring

Features

  • Protection Against Wear
  • Reduced Friction
  • Extended Cylinder Life
  • Operational Efficiency

$24.19
/EA
PB12-350-050-SC Powerband | CRC Distribution Inc.

Hercules® Sealing Products is pleased to introduce our new line of PowerbandTM tight tolerance premium wearrings. Manufactured from a highly engineered blend of premium nylon, glass fiber, and PTFE, PowerbandsTM offer a high strength wear-ring for all cylinder applications, including those with minimal lubrication. And, with a Coefficient of Friction nearly 50% lower than our standard product, your cylinders will run smoother and more efficiently than ever. All PowerbandsTM are fully machined with cross-section tolerances of only ±0.001”, chamfered corners, and scarf or angle-cut end gaps. Compared to standard tolerances of ±0.0025”, this tightened tolerance improves the alignment and concentric operation of cylinder rods and pistons. The fully machined chamfered corners will better accommodate cylinder housing grooves, further improving piston and rod alignment. Lastly, the scarf-cut end gap reduces the loss of bearing support that may occur during cylinder side-loading. When combined, these features reduce the tolerance stack-up within the components of the cylinder. As a result, your cylinders will operate more consistently and be capable of operating at higher pressures and higher side loads than with standard wear-ring products. Furthermore, with this improved cylinder operation, your seals will last longer and the life of your cylinder will be extended. PowerbandsTM are currently available in our most popular wear-ring dimensions.

3 1/4 in Nominal Inner Diameter | Powerband

Features

  • PowerbandsTM offer a high strength wear-ring for all cylinder applications
  • Fully machined with cross-section tolerances of only ±0.001
  • Chamfered corners
  • Scarf or angle-cut end gaps

$9.78
/EA
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • NEXT »