Retaining Rings

Once installed in the groove of a shaft, the portion of the ring protruding from the groove holds an assembly in place.

6.42 in Nominal Inner Diameter | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a shaft, the portion of the ring protruding from the groove holds an assembly in place.

0.708 in Nominal Inner Diameter | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a shaft, the portion of the ring protruding from the groove holds an assembly in place.

0.886 in Nominal Inner Diameter | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a shaft, the portion of the ring protruding from the groove holds an assembly in place.

0.941 in Nominal Inner Diameter | 0.093 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a shaft, the portion of the ring protruding from the groove holds an assembly in place.

1.06 in Nominal Inner Diameter | 0.093 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a shaft, the portion of the ring protruding from the groove holds an assembly in place.

1.179 in Nominal Inner Diameter | 0.093 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a shaft, the portion of the ring protruding from the groove holds an assembly in place.

1.291 in Nominal Inner Diameter | 0.109 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a shaft, the portion of the ring protruding from the groove holds an assembly in place.

1.408 in Nominal Inner Diameter | 0.109 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a shaft, the portion of the ring protruding from the groove holds an assembly in place.

2.594 in Nominal Inner Diameter | 0.187 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a shaft, the portion of the ring protruding from the groove holds an assembly in place.

3.07 in Nominal Inner Diameter | 0.25 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment