Retaining Rings

Once installed in the groove of a shaft, the portion of the ring protruding from the groove holds an assembly in place.

2.594 in Nominal Inner Diameter | 0.187 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a shaft, the portion of the ring protruding from the groove holds an assembly in place.

3.07 in Nominal Inner Diameter | 0.25 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a shaft, the portion of the ring protruding from the groove holds an assembly in place.

0.586 in Nominal Inner Diameter | 0.062 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a shaft, the portion of the ring protruding from the groove holds an assembly in place.

0.703 in Nominal Inner Diameter | 0.062 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a shaft, the portion of the ring protruding from the groove holds an assembly in place.

0.82 in Nominal Inner Diameter | 0.078 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a housing, the portion of the ring protruding from the groove holds an assembly in place.

0.914 in Nominal Inner Diameter | 0.078 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a housing, the portion of the ring protruding from the groove holds an assembly in place.

1.016 in Nominal Inner Diameter | 0.093 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a housing, the portion of the ring protruding from the groove holds an assembly in place.

1.119 in Nominal Inner Diameter | 0.109 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a housing, the portion of the ring protruding from the groove holds an assembly in place.

1.254 in Nominal Inner Diameter | 0.109 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a housing, the portion of the ring protruding from the groove holds an assembly in place.

1.357 in Nominal Inner Diameter | 0.125 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment