Search Results

5/8 inch packing pusher installation tool that allows each ring of packing to be properly seated in the stuffing box.

Each pusher set contains a short pusher (narrow width) and a long pusher (wide width). Both are 48 inches in length.

Seat-It will allow the installer to seat each packing ring so that it will radially expand and contribute to the sealing load resulting in better control of external leakage and reduced sleeve wear.

• Increase Life of Packing
• Increase Packing Performance
• Decrease Energy Costs
• Easy installation
• Resusable

5/8 inch flexible lantern ring made of 100% PTFE material.

A lantern ring is a perforated hollow ring located near the center of the stuffing box of a pump. Despite its simplistic appearance, it plays a crucial role in the successful operation of a pump system.

Placing a lantern ring between packing rings extends the life of the packing, the stuffing box, and the shaft. Ultimately, this increases the lifespan of the whole system long term.

Suitable for temperatures up to 550° F and pH 0 to 14.

Sold in roll form. Each roll is 48 inches long. Can be cut to the specific length needed, therefore eliminating the need to stock many different size rings.

5/8 inch ML2225 braided packing.

ML2225 is saturated and sealed with PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding. To assure good break-in characteristics, a special high-temperature synthetic lubricant is added.

ML2225 braided packing is a great general service option for rotary and reciprocating pumps, and agitators. Recommended for brine, caustics, mild acids, difficult chemicals, air, gases, solvents, oils, and general chemical plant applications.

Suitable for shaft speeds up to 1850 fpm. The max temperature is 500°F / 260°C and the pH range is 3-11.

The approximate yield for ML2225-5/8 is 4.2 ft/lb.

5/8 inch 4461 braided packing.

ML4461 is a high-performing, carbon filament packing treated throughout with PTFE to help prevent color contamination and carbon migration. Each strand of the carbon yarn is treated and impregnated with a PTFE suspensoid, totally encapsulating the packing to prevent carbon filaments from migrating into the system.

ML4461 braided packing is constructed to work best with high temperature and high shaft speed applications. It is recommended for use in demanding applications such as digesters, outlet devices, steam vessels, and top separators. ML4461 can be used in most chemical services, except strong oxidizers.

ML4461 is suitable for shaft speeds up to 3000 fpm. The max temperature is 600°F / 345°C and the pH range is 0-14.

The approximate yield for ML4461-5/8 is 3.8 ft/lb.

Packing rings will not cross-link or fuse in service, allowing for easy removal and elimination of costly spacer rings.

5/8 inch ML560 braided packing.

ML560 is a high-performance, carbon fiber braided packing. It is manufactured through a heat treatment process of a synthetic yarn. These yarns are processed through multiple heat treatments to achieve the desired carbon or graphite content. Because of its high thermal conductivity and lubricity, this packing can operate without flush water in some applications.

ML560 braided packing is excellent in pumping slurries where the packing experiences premature failure. It is recommended for high-speed rotary pumps and slurry service, pumps and agitators in pulp and paper, mining, and other process industries.

ML560 is suitable for shaft speeds up to 4000 fpm. The max temperature is 1250°F / 538°C (in non-oxidizing conditions) and 850°F / 454°C (in oxidizing conditions) and the pH range is 0-14.

The approximate yield for ML560-5/8 is 4.8 ft/lb.

5/8 inch 219 braided packing.

219 flax packing is constructed with a square braid, impregnated throughout with a pure PTFE dispersion, which acts as a surface leveler and fills in voids in the packing. The PTFE prevents wicking, and forms a protective shield around the flax fibers.

Recommended for brine, cold water, and cold oil and high shaft speeds. 219 flax packing is used on hydraulic rams, accumulators, reciprocating and rotary shafts, plungers, and stern tubes.

219 flax packing is suitable for shaft speeds up to 1885 fpm. The max temperature is 220°F / 104°C and the pH range is 5-9.

The approximate yield for 219-5/8 is 4.5 ft/lb.

5/8 inch ML2001 braided packing.

ML2001 is a flexible braided graphite packing style that is constructed with pure homogenous graphite bonded to a carrier for strength and thermal stability. It has no added lubricants or binders to cook out or become brittle.

Recommended for rotating shafts where high speeds and thermal conductivity are required, including applications with unlimited shaft speeds.

ML2001 is suitable for shaft speeds up to Unlimited. The max temperature is 1200°F/649°C (in steam) and 850°F/454°C (in oxidizing conditions) and the pH range is 0-14 except in strong oxidizers.

The approximate yield for ML2001-5/8 is 4.8 ft/lb.

5/8 inch ML2235 braided packing.

ML2235 has prelubricated PTFE fibers to provide a softer, more flexible packing. The prelubrication offers improved peripheral speed characteristics and exothermic properties, unlike other PTFE fluorocarbon filament packing. ML2235 packing does not glaze in higher speed applications. It is inert and virtually indestructible with a low coefficient of friction and high compressive strength.

ML2235 braided packing is recommended for the most severe services. It is suitable for all oxidizers and corrosives except for molten alkali metals.

ML2235 is suitable for shaft speeds up to 1200 fpm. The max temperature is 500°F / 260°C and the pH range is 0-14.

The approximate yield for ML2235-5/8 is 3.5 ft/lb.

• No glazing at high speeds
• High compression strength
• Low coefficient of friction
• Inert and virtually indestrucible

5/8 inch ML2238 braided packing.

ML2238 is a specially treated PTFE packing for high-speed applications. Other PTFE filaments glaze or harden because of frictional heat due to high speeds and thermal expansion.

ML2238 braided packing is recommended for the most severe services. Can be used with all oxidizers and corrosives except for molten alkali metals.

ML2238 is suitable for shaft speeds up to 1885 fpm. The max temperature is 500°F / 260°C and the pH range is 0-14.

The approximate yield for ML2238-5/8 is 3.4 ft/lb.

5/8 inch ML2240 braided packing.

ML2240 is a state-of-the-art, ultra high-speed and non-contaminating PTFE white packing. It will not glaze or harden and benefits from very low thermal expansion, making it ideal for any application that requires white packing or food grade packing.

ML2240 braided packing is specifically formulated for mixers, agitators, and pumps with high shaft speeds that require white braided packing.

ML2240 is suitable for shaft speeds up to 3300 fpm. The max temperature is 500°F / 260°C and the pH range is 0-14.

The approximate yield for ML2240-5/8 is 3.3 ft/lb.