Search Results
Category Group
CPO-1500 has a 1.5 in diameter with Standard Chrome. The base material is 1045 Carbon Steel with a yield strength of 75,000 psi.
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
- Extremely smooth surface finish
- Excellent wear and corrosion resistance
- Good strength and impact properties
- Good machinability
- Reasonable weldability
- Fair response to normal heat treating and induction hardening practices
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $5.40 |
| 15-29 | $3.60 |
| 30-89 | $2.57 |
| 90-134 | $2.00 |
| 135+ | $1.80 |
1.5 in induction hardened chrome shafting. The base material is 1045/1050 Carbon Steel with 0.0005 in (0.0127mm minimum)-thick chrome plating and a case depth of 0.05 in (1.27 mm).
Induction Hardened Chrome is typically used in abrasive envrionments where the cylinder is exposed to rocks or heavy debris. Also used to machine clevis pins.
- Greater strength
- Better resistance to mechanical damage
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $6.00 |
| 15-29 | $4.00 |
| 30-89 | $2.86 |
| 90-134 | $2.22 |
| 135+ | $2.00 |
SS17-4/CPO-1500 has a 1.5 in diameter. The material is 17-4 Stainless Steel with Standard Chrome on the exterior.
Commonly used in offshore cranes, marine cylinders, and marine steering cylinders.
- Highest level of corrosion resistance
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $9.75 |
| 15-44 | $8.38 |
| 45-59 | $6.50 |
| 60-104 | $5.86 |
| 105+ | $5.33 |
660-1500 has a 1.5 in rod diameter. The material is 660 Bronze Copper Alloy 932.
660 Bronze is known as “bearing bronze” because it is most commonly used in bushing and bearing applications. While it is easily machined, the bronze alloy is hard, strong, and resistant to wear. It is also less dependent on lubrication than other alloys and has reasonable corrosion resistance to seawater and brine.
660 Bronze is used for machining bearings, bushings, wear strips, and plates. This grade of bronze is used in pump, cylinder, and machine tool applications.
- Good anti-friction properties
- Ample strength and hardness
- Adeqaute ductility
- Excellent machinability
Packages longer than 44 inches may have additional freight charges.
| 1-4 | $5.53 |
| 5-9 | $4.91 |
| 10-14 | $4.43 |
| 15+ | $4.03 |
1.5 in induction hardened chrome shafting. The base material is 4140 Alloy Steel with 0.0005 in (0.0127mm minimum)-thick chrome plating and a case depth of 0.05 in (1.27mm).
Induction Hardened Chrome is typically used in abrasive envrionments where the cylinder is exposed to rocks or heavy debris. Also used to machine clevis pins.
- Greater strength
- Better resistance to mechanical damage
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $6.00 |
| 15-29 | $4.00 |
| 30-89 | $2.86 |
| 90-134 | $2.22 |
| 135+ | $2.00 |
SSB-1500 has a 1.5 in diameter. The material is 17-4 Stainless Steel with a Turned, Ground, and Polished exterior.
Packages longer than 44 inches may have additional freight charges.
