Search Results
Category Group
HT-2250X1750 has a wall thickness of 0.25 in. The ID is 1.75 in and the OD is 2.25 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $3.78 |
| 15-59 | $2.84 |
| 60+ | $2.27 |
ALHT2250X2000 has a 0.125 in wall thickness. The ID is 2 in and the OD is 2.25 in. The material is 6063-T832 Aluminum.
Seamless extruded and cold-drawn. Hard coated on the ID which gives the aluminum tube a tough, abrasive-resitant surface.
6063-T832 Aluminum is used for pneumatic cylinder applications requiring very good corrosion resistance and/or light weight. Can also be used for low-pressure oil cylinders (250 psi or less).
- No machining required on the ID
- Seamless extruded and cold-drawn
- Hard coated interior
- Corrosion resistance
- Good weldability
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $3.43 |
| 15-29 | $2.74 |
| 30-104 | $1.96 |
| 105+ | $1.52 |
CIHT2250X2000 has a wall thickness of 0.125 in. The ID is 2 in and the OD is 2.25 in. The material is 1026 Carbon Steel with chrome plating on the Inside Surface.
Packages longer than 44 inches may have additional freight charges.
SSHT-2000X2250 has a wall thickness of 0.125 in.
The ID is 2 in and the OD is 2.25 in.
The material is 316 Stainless Steel and has been honed, stress-relieved and annealed.
Stainless steel honed tubes are typically used for marine cylinders or hydraulics that are in contact with water.
- Corrosion resistance
Packages longer than 44 inches may have additional freight charges.
660-1750X2250 has a 0.25 in thick wall. The ID is 1.75 in and the OD is 2.25 in. The material is 660 Bronze Copper Alloy 932.
660 Bronze is used for machining bearings, bushings, wear strips, and plates. This grade of bronze is used in pump, cylinder, and machine tool applications.
- Long life span
- Machinability rating of 70
- Not subject to dezincification
Packages longer than 44 inches may have additional freight charges.
CPOD2250X1500 has a wall thickness of 0.375 in. The ID is 1.5 in and the OD is 2.25 in. The material is 1026 Carbon Steel with chrome plating on the Outside Surface.
Packages longer than 44 inches may have additional freight charges.
CPOD2250X1750 has a wall thickness of 0.25 in. The ID is 1.75 in and the OD is 2.25 in. The material is 1026 Carbon Steel with chrome plating on the Outside Surface.
Packages longer than 44 inches may have additional freight charges.
HT-2250X1875 has a wall thickness of 0.1875 in. The ID is 1.875 in and the OD is 2.25 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Packages longer than 44 inches may have additional freight charges.
