Search Results

9/16 inch ML6225 braided packing.

ML6225 is a proprietary blend of non-asbestos TEK-PRO yarns treated with PTFE throughout the packing. The TEK-PRO yarns retain a greater volume of PTFE dispersion and are more uniformly distributed to provide longer and better sealing plus resistance to chemical attack. A light lubricant is applied under pressure to improve run-in properties.

ML6225 braided packing is recommended for paper mill applications, recovery pumps, chemical applications, and caustic soda. It is an excellent all-around, general service chemical packing. Suitable for rotating and reciprocating pump and valve equipment, mixers, and agitators.

ML6225 is suitable for shaft speeds up to 1885 fpm. The max temperature is 500°F / 260°C and the pH range is 3-12.

The approximate yield for ML6225-9/16 is 4.5 ft/lb.

The special impregnation procedure fills all voids throughout the body of the packing with PTFE dispersion. A superior general purpose packing for tougher-than-normal applications.

A proprietary blend of non-asbestos TEK-PRO yarns treated with PTFE throughout the packing. The PTFE suspensoin thoroughly seals and fills all voids providing better resistance to chemical attack. A light lubricant is applied under pressure to improve run-in properties.

The TEK-PRO yarns retain a greater volume of PTFE dispersion and are more uniformly distributed to provide longer and better sealing.

5/8 inch 219 braided packing.

219 flax packing is constructed with a square braid, impregnated throughout with a pure PTFE dispersion, which acts as a surface leveler and fills in voids in the packing. The PTFE prevents wicking, and forms a protective shield around the flax fibers.

Recommended for brine, cold water, and cold oil and high shaft speeds. 219 flax packing is used on hydraulic rams, accumulators, reciprocating and rotary shafts, plungers, and stern tubes.

219 flax packing is suitable for shaft speeds up to 1885 fpm. The max temperature is 220°F / 104°C and the pH range is 5-9.

The approximate yield for 219-5/8 is 4.5 ft/lb.

9/16 inch ML4800 braided packing.

ML4800 is consutrcuted of aramid fibers. Aramid is a hard fiber that forms imperfectly around a shaft, creating gaps that accelrarate leakage. The aramid fibers are treated with PTFE dispersion, which fills and seals the gaps in the packing fibers. After braiding, a PTFE coating is applied and the packing is forced air-dried. ML4800 packing will not wick.

ML4800 braided packing performs well in extremely abrasive environments. It is recommended for caustics, mild acids, chemicals, air, oil, gases, solvents, and general service applications.

ML4800 is suitable for shaft speeds up to 1900 fpm. The max temperature is 500°F / 260°C and the pH range is 3-11.

The approximate yield for ML4800-9/16 is 4.5 ft/lb.