Search Results
Category Group
36mm induction hardened chrome shafting. The base material is 1045/1050 Carbon Steel with 0.0005 in (0.0127mm minimum)-thick chrome plating and a case depth of 0.05 in (1.27 mm).
Induction Hardened Chrome is typically used in abrasive envrionments where the cylinder is exposed to rocks or heavy debris. Also used to machine clevis pins.
- Greater strength
- Better resistance to mechanical damage
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $5.85 |
| 15-29 | $3.90 |
| 30-89 | $2.93 |
| 90-134 | $2.60 |
| 135+ | $2.34 |
Light duty, polyurethane wiper with a double-stepped shoulder to fit tightly into the gland throat.
- Double-stepped shoulder
MCPO-38 has a 38 mm diameter with Standard Chrome. The base material is 1045 Carbon Steel with a yield strength of 75,000 psi.
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
- Extremely smooth surface finish
- Excellent wear and corrosion resistance
- Good strength and impact properties
- Good machinability
- Reasonable weldability
- Fair response to normal heat treating and induction hardening practices
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $6.00 |
| 15-29 | $4.00 |
| 30-89 | $3.00 |
| 90-134 | $2.66 |
| 135+ | $2.40 |
Light duty, polyurethane wiper with a double-stepped shoulder to fit tightly into the gland throat.
- Double-stepped shoulder
MHT-125X147 has a wall thickness of 11 mm. The ID is 125 mm and the OD is 147 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $17.41 |
| 15-44 | $13.51 |
| 45-104 | $12.17 |
| 105+ | $11.08 |
MHT-80X90 has a wall thickness of 5 mm. The ID is 80 mm and the OD is 90 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $5.86 |
| 15-74 | $4.55 |
| 75-104 | $4.10 |
| 105+ | $3.73 |
MHT-45X57 has a wall thickness of 6 mm. The ID is 45 mm and the OD is 57 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $7.64 |
| 15-74 | $5.93 |
| 75-104 | $5.34 |
| 105+ | $4.86 |
MHT-60X70 has a wall thickness of 5 mm. The ID is 60 mm and the OD is 70 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $6.41 |
| 15-74 | $4.97 |
| 75-104 | $4.48 |
| 105+ | $4.08 |
Urethane rod u-seal with an additional lip near the heel. The twin lip design provides stability, friction-reducing lube retention, and some contaminant resistance.
