Search Results
Category Group
HC-2500-12 has a 3 in OD and is made to fit a 2 in bore cylinder.
Head cap size is determined based on the bending stress.
A static seal or o-ring is used in between the head cap and barrel (except welded construction).
The main function of the head cap is to enclose the pressure chamber at one end. The cap is connected to the cylinder body by means of welding, threading, bolts, or tie rod.
*
4.5 in Hot Finished 1018 Carbon Steel*
round bar. Material can be cut to any size.
Suitable for shafting and applications that do not require the greater strength of high carbon and alloy steels.
- Good case hardening properties
- Fair machinability
- Readily brazed and welded
Packages longer than 44 inches may have additional freight charges.
| 1-4 | $21.93 |
| 5-9 | $10.97 |
| 10-14 | $9.74 |
| 15+ | $8.77 |
*
9 in Hot Finished 1018 Carbon Steel*
round bar. Material can be cut to any size.
Suitable for shafting and applications that do not require the greater strength of high carbon and alloy steels.
- Good case hardening properties
- Fair machinability
- Readily brazed and welded
Packages longer than 44 inches may have additional freight charges.
| 1-4 | $120.50 |
| 5-9 | $60.25 |
| 10-14 | $53.50 |
| 15+ | $48.20 |
Machined from 1018 Carbon Steel for a 3 in cylinder.
The length is 0.5 in and the lip is 0.25 in in tall.
Base plates are welded to the end of the cylinder opposite the rod end to secure the cylinder. They provide a solid support for the entire cylinder base area.
HC-5000-12 has a 5.75 in OD and is made to fit a 4.5 in bore cylinder.
Head cap size is determined based on the bending stress.
A static seal or o-ring is used in between the head cap and barrel (except welded construction).
The main function of the head cap is to enclose the pressure chamber at one end. The cap is connected to the cylinder body by means of welding, threading, bolts, or tie rod.
HC-3500-12 has a 4 in OD and is made to fit a 3 in bore cylinder.
Head cap size is determined based on the bending stress.
A static seal or o-ring is used in between the head cap and barrel (except welded construction).
The main function of the head cap is to enclose the pressure chamber at one end. The cap is connected to the cylinder body by means of welding, threading, bolts, or tie rod.
Female connection on both ends.
ORB fittings incorporate a port connection for leak prevention in medium and high pressure hydraulic systems. The female port has a straight thread and a machined surface, along with a chamfer where the o-ring is seated. The seal is created when the o-ring is compressed into the chamfer when mating the male and female connection providing a leak-tight seal.
Machined from 1018 Carbon Steel for a 5 in cylinder.
The length is 0.75 in and the lip is 0.375 in in tall.
Base plates are welded to the end of the cylinder opposite the rod end to secure the cylinder. They provide a solid support for the entire cylinder base area.
HC-6625-12 has a 7.5 in OD and is made to fit a 6 in bore cylinder.
Head cap size is determined based on the bending stress.
A static seal or o-ring is used in between the head cap and barrel (except welded construction).
The main function of the head cap is to enclose the pressure chamber at one end. The cap is connected to the cylinder body by means of welding, threading, bolts, or tie rod.
Machined from 1018 Carbon Steel for a 2.5 in cylinder.
The length is 0.5 in and the lip is 0.25 in in tall.
Base plates are welded to the end of the cylinder opposite the rod end to secure the cylinder. They provide a solid support for the entire cylinder base area.
