Search Results
Category Group
1 X 1 3/8 X 5/16 B-lip URE
*
4 in Hot Finished 1018 Carbon Steel*
round bar. Material can be cut to any size.
Suitable for shafting and applications that do not require the greater strength of high carbon and alloy steels.
- Good case hardening properties
- Fair machinability
- Readily brazed and welded
Packages longer than 44 inches may have additional freight charges.
| 1-4 | $19.27 |
| 5-9 | $9.63 |
| 10-14 | $8.55 |
| 15+ | $7.71 |
O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.
70 Durometer | Buna-N Rubber Material | 3 1/4 in Nominal Inner Diameter | 3/32 in Cross Section | O-Ring
Features
- Pressure range varies according to diametral clearance
- Temperature range of -40 °F to -240 °F
TR-625 has a 0.625 in diameter. The material is 1144 Carbon Steel, which is equivalent to Stressproof tie rod.
Tie rods are sold in 12 ft. lengths only. Rods can be cut for UPS shipment or left whole, if necessary. Freight charges may vary depending on required length.
Packages longer than 44 inches may have additional freight charges.
Utilizing a sturdy metal case, these wipers are molded from the same high performance urethane used in our Heavy Duty U-seals. Built for severe service, these wipers are capable of surviving hostile environments.
92A Durometer | Urethane Material | 1 1/4 in Nominal Inner Diameter
Features
- Used in Heavy Duty U-seals
- Capable of surviving hostile environments
- Molded from the high performance urethane
CPO-4500 has a 4.5 in diameter with Standard Chrome. The base material is 1045 Carbon Steel with a yield strength of 75,000 psi.
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
- Extremely smooth surface finish
- Excellent wear and corrosion resistance
- Good strength and impact properties
- Good machinability
- Reasonable weldability
- Fair response to normal heat treating and induction hardening practices
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $34.00 |
| 15-29 | $24.31 |
| 30-59 | $21.25 |
| 60-119 | $17.00 |
| 120+ | $15.47 |
HT-9000X8000 has a wall thickness of 0.5 in. The ID is 8 in and the OD is 9 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $23.24 |
| 15-59 | $20.32 |
| 60-89 | $18.04 |
| 90+ | $16.25 |
1.125 in induction hardened chrome shafting. The base material is 1045/1050 Carbon Steel with 0.0005 in (0.0127mm minimum)-thick chrome plating and a case depth of 0.05 in (1.27 mm).
Induction Hardened Chrome is typically used in abrasive envrionments where the cylinder is exposed to rocks or heavy debris. Also used to machine clevis pins.
- Greater strength
- Better resistance to mechanical damage
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $4.03 |
| 15-29 | $2.69 |
| 30-89 | $1.92 |
| 90-134 | $1.49 |
| 135+ | $1.34 |
HWT-3500X1500 has a wall thickness of 1 in. The ID is 1.5 in and the OD is 3.5 in. The material is 1026 Carbon Steel.
Heavy Wall Tubes are used for machining high strength and close tolerance parts like bushings, axles, hydraulics, and sleeves.
Packages longer than 44 inches may have additional freight charges.
| 1-4 | $13.87 |
| 5-24 | $12.12 |
| 25-49 | $10.76 |
| 50+ | $9.70 |
HWT-4000X2000 has a wall thickness of 1 in. The ID is 2 in and the OD is 4 in. The material is 1026 Carbon Steel.
Heavy Wall Tubes are used for machining high strength and close tolerance parts like bushings, axles, hydraulics, and sleeves.
Packages longer than 44 inches may have additional freight charges.
| 1-4 | $14.74 |
| 5-24 | $12.88 |
| 25-49 | $11.44 |
| 50+ | $10.31 |
