Hallite 520 Wiper
View Related Items
The secondary sealing lip located behind the primary sealing lip improves stability of the seal in the gland. The unique profile of the NBR energizer ensures the primary sealing lips maintain contact under low or no pressure situations while ensuring proper sealing at higher pressures.
The Hallite 621 also incorporates an acetyl anti-extrusion ring to withstand side loads and extreme pressure peaks even with the extrusion gaps.
WR-NYL, 5 1/2 X 1/2 Wear Ring
ST-525-XL 94A Urethane Wiper Ring | 5 1/4 in ID 6 in OD
Style ST-XL wipers are molded from premium urethane and are direct replacements for Style “ST” or “D” wipers. The outside diameter of the ring has a crush lip providing extra interference in the groove. A bead on the shoulder stops contaminates from entering through the groove. The inside diameter is ribbed to prevent pressure traps between the wiper and rod seal.
94A Durometer | Urethane Material | 5 1/4 in Nominal Inner Diameter
Features
- Crush lip to provide extra interference
- Bead on the shoulder to keep contaminants out
- Ribbed ID to prevent pressure traps
Export To PDF
Item Specifications
-
94A
-
0.374 Inch
-
+0.004, +0.000
-
5.997 Inch
-
+0.006, +0.000
-
Hallite
-
Urethane
-
230 °F
-
-40 °F
-
3/8 Inch
-
5 1/4 Inch
-
6 Inch
-
5.25 Inch
-
-0.0017, -0.0056
-
ST-XL
-
5 Years
-
3 ft/sec
-
ST-XL
-
5.743 Inch
-
+0.010, +0.000
-
Extra Lip
-
inch
-
0.12 lbs per EA
View Related Items
The secondary sealing lip located behind the primary sealing lip improves stability of the seal in the gland. The unique profile of the NBR energizer ensures the primary sealing lips maintain contact under low or no pressure situations while ensuring proper sealing at higher pressures.
The Hallite 621 also incorporates an acetyl anti-extrusion ring to withstand side loads and extreme pressure peaks even with the extrusion gaps.
WR-NYL, 5 1/2 X 1/2 Wear Ring
