80 mm x 100 mm x 10 mm Honed Tube - 1026 Carbon Steel
View Related Items
Urethane Material | 70 MM Nominal Inner Diameter | U-Seal
Phenolic Material | 75 MM Nominal Inner Diameter | Wear Ring
70A Durometer | PTFE Material | 64.5 MM Nominal Inner Diameter | Piston Seal
Steel Material | Unitized Piston
80 mm ID x 100 mm OD Honed Tube | 10 mm Wall
This 80 mm ID x 100 mm OD honed tube is commonly used as cylinder barrel stock for mobile and industrial hydraulic cylinders, offering the honed ID finish needed for reliable piston seal performance without additional machining. MHT-80X100 has a wall thickness of 10 mm. The ID is 80 mm and the OD is 100 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed. Available cut to your specified length, with fast fabrication and shipping from our Robertsdale, AL facility.
80 mm ID x 100 mm OD honed tube, 10 mm wall, 1026 Carbon Steel. Cut to length.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges. All rod and tubing are cut 0.125" to 0.250" over the requested length to ensure adequate finish stock. No material will be cut below the ordered length (−0.000").
Export To PDF
Item Specifications
-
3.150 in X 3.937 in
-
80 mm
-
1026 Carbon Steel
-
100 mm
-
ASTM A513 Type 5, ST 52.3
-
288 in
-
10 mm
-
1.24 lbs per IN
View Related Items
Urethane Material | 70 MM Nominal Inner Diameter | U-Seal
Phenolic Material | 75 MM Nominal Inner Diameter | Wear Ring
70A Durometer | PTFE Material | 64.5 MM Nominal Inner Diameter | Piston Seal
Steel Material | Unitized Piston
