40 mm x 50 mm x 5 mm Honed Tube - 1026 Carbon Steel
View Related Items
Urethane Material | 30 MM Nominal Inner Diameter | U-Seal
Phenolic Material | 35 MM Nominal Inner Diameter | Wear Ring
70A Durometer | PTFE Material | 29 MM Nominal Inner Diameter | Piston Seal
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
40 mm ID x 50 mm OD Honed Tube | 5 mm Wall
This 40 mm ID x 50 mm OD honed tube is a precision fit for compact hydraulic cylinder barrels, mobile equipment rams, and small-bore actuators where tight ID tolerance and surface finish matter for seal life. MHT-40X50 has a wall thickness of 5 mm. The ID is 40 mm and the OD is 50 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed. Available cut to your specified length, with fast fabrication and shipping from our Robertsdale, AL facility.
| 1-14 | $4.29 |
| 15-74 | $3.33 |
| 75-104 | $3.00 |
| 105+ | $2.73 |
40 mm ID x 50 mm OD honed tube, 5 mm wall, 1026 Carbon Steel. Cut to length.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges. All rod and tubing are cut 0.125" to 0.250" over the requested length to ensure adequate finish stock. No material will be cut below the ordered length (−0.000").
Export To PDF
Item Specifications
-
1.575 in X 1.969 in
-
40 mm
-
1026 Carbon Steel
-
50 mm
-
ASTM A513 Type 5, ST 52.3
-
288 in
-
5 mm
-
0.24 lbs per IN
View Related Items
Urethane Material | 30 MM Nominal Inner Diameter | U-Seal
Phenolic Material | 35 MM Nominal Inner Diameter | Wear Ring
70A Durometer | PTFE Material | 29 MM Nominal Inner Diameter | Piston Seal
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
