225 mm x 254 mm x 14.5 mm Honed Tube - 1026 Carbon Steel
225 mm ID x 254 mm OD Honed Tube | 14.5 mm Wall
This 225 mm ID x 254 mm OD honed tube is built for heavy-duty and large-bore hydraulic cylinder applications — mining, construction, and industrial press cylinders — where wall strength and a consistent honed bore are critical. MHT-225X10000 has a wall thickness of 14.5 mm. The ID is 225 mm and the OD is 254 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed. The heavier wall section supports higher pressure ratings for demanding cylinder rebuild and OEM applications, cut to your specified length and shipped fast from our Robertsdale, AL facility.
225 mm ID x 254 mm OD honed tube, 14.5 mm wall, 1026 Carbon Steel. Cut to length.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges. All rod and tubing are cut 0.125" to 0.250" over the requested length to ensure adequate finish stock. No material will be cut below the ordered length (−0.000").
Export To PDF
Item Specifications
-
8.858 in X 10.000 in
-
225 mm
-
1026 Carbon Steel
-
254 mm
-
ASTM A513 Type 5, ST 52.3
-
288 in
-
14.5 mm
-
4.79 lbs per IN
