180 mm x 200 mm x 10 mm Honed Tube - 1026 Carbon Steel
View Related Items
Urethane Material | 160 MM Nominal Inner Diameter | U-Seal
Phenolic Material | 175 MM Nominal Inner Diameter | Wear Ring
70A Durometer | PTFE Material | 159 MM Nominal Inner Diameter | Piston Seal
90mm IHMCPO C1045/C1050 100K
180 mm ID x 200 mm OD Honed Tube | 10 mm Wall
This 180 mm ID x 200 mm OD honed tube is built for heavy-duty and large-bore hydraulic cylinder applications — mining, construction, and industrial press cylinders — where wall strength and a consistent honed bore are critical. MHT-180X200 has a wall thickness of 10 mm. The ID is 180 mm and the OD is 200 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed. Available cut to your specified length, with fast fabrication and shipping from our Robertsdale, AL facility.
180 mm ID x 200 mm OD honed tube, 10 mm wall, 1026 Carbon Steel. Cut to length.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges. All rod and tubing are cut 0.125" to 0.250" over the requested length to ensure adequate finish stock. No material will be cut below the ordered length (−0.000").
Export To PDF
Item Specifications
-
7.807 in X 7.874 in
-
180 mm
-
1026 Carbon Steel
-
200 mm
-
ASTM A513 Type 5, ST 52.3
-
288 in
-
10 mm
-
2.61 lbs per IN
View Related Items
Urethane Material | 160 MM Nominal Inner Diameter | U-Seal
Phenolic Material | 175 MM Nominal Inner Diameter | Wear Ring
70A Durometer | PTFE Material | 159 MM Nominal Inner Diameter | Piston Seal
90mm IHMCPO C1045/C1050 100K
