160 mm x 190 mm x 15 mm Honed Tube - 1026 Carbon Steel
View Related Items
Urethane Material | 140 MM Nominal Inner Diameter | U-Seal
Phenolic Material | 155 MM Nominal Inner Diameter | Wear Ring
70A Durometer | PTFE Material | 139 MM Nominal Inner Diameter | Piston Seal
80mm IHMCPO C1045/C1050 50-100K
160 mm ID x 190 mm OD Honed Tube | 15 mm Wall
This 160 mm ID x 190 mm OD honed tube is built for heavy-duty and large-bore hydraulic cylinder applications — mining, construction, and industrial press cylinders — where wall strength and a consistent honed bore are critical. MHT-160X190 has a wall thickness of 15 mm. The ID is 160 mm and the OD is 190 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed. The heavier wall section supports higher pressure ratings for demanding cylinder rebuild and OEM applications, cut to your specified length and shipped fast from our Robertsdale, AL facility.
160 mm ID x 190 mm OD honed tube, 15 mm wall, 1026 Carbon Steel. Cut to length.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges. All rod and tubing are cut 0.125" to 0.250" over the requested length to ensure adequate finish stock. No material will be cut below the ordered length (−0.000").
Export To PDF
Item Specifications
-
6.229 in X 7.480 in
-
160 mm
-
1026 Carbon Steel
-
190 mm
-
ASTM A513 Type 5, ST 52.3
-
288 in
-
15 mm
-
3.63 lbs per IN
View Related Items
Urethane Material | 140 MM Nominal Inner Diameter | U-Seal
Phenolic Material | 155 MM Nominal Inner Diameter | Wear Ring
70A Durometer | PTFE Material | 139 MM Nominal Inner Diameter | Piston Seal
80mm IHMCPO C1045/C1050 50-100K
