145 mm x 173 mm x 14 mm Honed Tube - 1026 Carbon Steel
View Related Items
Urethane Material | 125 MM Nominal Inner Diameter | U-Seal
Phenolic Material | 140 MM Nominal Inner Diameter | Wear Ring
70A Durometer | PTFE Material | 124 MM Nominal Inner Diameter | Piston Seal
80mm IHMCPO C1045/C1050 50-100K
145 mm ID x 173 mm OD Honed Tube | 14 mm Wall
This 145 mm ID x 173 mm OD honed tube is built for heavy-duty and large-bore hydraulic cylinder applications — mining, construction, and industrial press cylinders — where wall strength and a consistent honed bore are critical. MHT-145X173 has a wall thickness of 14 mm. The ID is 145 mm and the OD is 173 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed. The heavier wall section supports higher pressure ratings for demanding cylinder rebuild and OEM applications, cut to your specified length and shipped fast from our Robertsdale, AL facility.
145 mm ID x 173 mm OD honed tube, 14 mm wall, 1026 Carbon Steel. Cut to length.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges. All rod and tubing are cut 0.125" to 0.250" over the requested length to ensure adequate finish stock. No material will be cut below the ordered length (−0.000").
Export To PDF
Item Specifications
-
5.710 in X 6.811 in
-
145 mm
-
1026 Carbon Steel
-
173 mm
-
ASTM A513 Type 5, ST 52.3
-
288 in
-
14 mm
-
3.06 lbs per IN
View Related Items
Urethane Material | 125 MM Nominal Inner Diameter | U-Seal
Phenolic Material | 140 MM Nominal Inner Diameter | Wear Ring
70A Durometer | PTFE Material | 124 MM Nominal Inner Diameter | Piston Seal
80mm IHMCPO C1045/C1050 50-100K
