140 mm x 160 mm x 10 mm Honed Tube - 1026 Carbon Steel
140 mm ID x 160 mm OD Honed Tube | 10 mm Wall
This 140 mm ID x 160 mm OD honed tube is built for heavy-duty and large-bore hydraulic cylinder applications — mining, construction, and industrial press cylinders — where wall strength and a consistent honed bore are critical. MHT-140X160 has a wall thickness of 10 mm. The ID is 140 mm and the OD is 160 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed. Available cut to your specified length, with fast fabrication and shipping from our Robertsdale, AL facility.
140 mm ID x 160 mm OD honed tube, 10 mm wall, 1026 Carbon Steel. Cut to length.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges. All rod and tubing are cut 0.125" to 0.250" over the requested length to ensure adequate finish stock. No material will be cut below the ordered length (−0.000").
Export To PDF
Item Specifications
-
5.512 in X 6.229 in
-
140 mm
-
1026 Carbon Steel
-
160 mm
-
ASTM A513 Type 5, ST 52.3
-
288 in
-
10 mm
-
2.06 lbs per IN
