130 mm x 153 mm x 11.5 mm Honed Tube - 1026 Carbon Steel
View Related Items
70mm IHMCPO C1045/C1050 50-100K
70A Durometer | PTFE Material | 109 MM Nominal Inner Diameter | Piston Seal
Phenolic Material | 125 MM Nominal Inner Diameter | Wear Ring
Urethane Material | 110 MM Nominal Inner Diameter | U-Seal
130 mm ID x 153 mm OD Honed Tube | 11.5 mm Wall
This 130 mm ID x 153 mm OD honed tube is built for heavy-duty and large-bore hydraulic cylinder applications like mining, construction, and industrial press cylinders where wall strength and a consistent honed bore are critical.
MHT-130X153 has a wall thickness of 11.5 mm. The ID is 130 mm and the OD is 153 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed. Available cut to your specified length, with fast shipping from our Robertsdale, AL facility.
| 1-14 | $17.04 |
| 15-44 | $13.23 |
| 45-104 | $11.92 |
| 105+ | $10.84 |
130 mm ID x 153 mm OD honed tube, 11.5 mm wall, 1026 Carbon Steel. Cut to length.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges. All rod and tubing are cut 0.125" to 0.250" over the requested length to ensure adequate finish stock. No material will be cut below the ordered length (−0.000").
Export To PDF
Item Specifications
-
5.118 in X 6.024 in
-
130 mm
-
1026 Carbon Steel
-
153 mm
-
ASTM A513 Type 5, ST 52.3
-
288 in
-
11.5 mm
-
2.17 lbs per IN
View Related Items
70mm IHMCPO C1045/C1050 50-100K
70A Durometer | PTFE Material | 109 MM Nominal Inner Diameter | Piston Seal
Phenolic Material | 125 MM Nominal Inner Diameter | Wear Ring
Urethane Material | 110 MM Nominal Inner Diameter | U-Seal
