125 mm x 145 mm x 10 mm Honed Tube - 1026 Carbon Steel
View Related Items
Urethane Material | 105 MM Nominal Inner Diameter | U-Seal
Phenolic Material | 120 MM Nominal Inner Diameter | Wear Ring
70A Durometer | PTFE Material | 104 MM Nominal Inner Diameter | Piston Seal
Steel Material | Unitized Piston
125 mm ID x 145 mm OD Honed Tube | 10 mm Wall
This 125 mm ID x 145 mm OD honed tube is built for heavy-duty and large-bore hydraulic cylinder applications — mining, construction, and industrial press cylinders — where wall strength and a consistent honed bore are critical. MHT-125X145 has a wall thickness of 10 mm. The ID is 125 mm and the OD is 145 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed. Available cut to your specified length, with fast fabrication and shipping from our Robertsdale, AL facility.
125 mm ID x 145 mm OD honed tube, 10 mm wall, 1026 Carbon Steel. Cut to length.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges. All rod and tubing are cut 0.125" to 0.250" over the requested length to ensure adequate finish stock. No material will be cut below the ordered length (−0.000").
Export To PDF
Item Specifications
-
4.921 in X 5.709 in
-
125 mm
-
1026 Carbon Steel
-
145 mm
-
ASTM A513 Type 5, ST 52.3
-
288 in
-
10 mm
-
1.86 lbs per IN
View Related Items
Urethane Material | 105 MM Nominal Inner Diameter | U-Seal
Phenolic Material | 120 MM Nominal Inner Diameter | Wear Ring
70A Durometer | PTFE Material | 104 MM Nominal Inner Diameter | Piston Seal
Steel Material | Unitized Piston
