120 mm x 130 mm x 5 mm Honed Tube - 1026 Carbon Steel
120 mm ID x 130 mm OD Honed Tube | 5 mm Wall
This 120 mm ID x 130 mm OD honed tube is built for heavy-duty and large-bore hydraulic cylinder applications — mining, construction, and industrial press cylinders — where wall strength and a consistent honed bore are critical. MHT-120X130 has a wall thickness of 5 mm. The ID is 120 mm and the OD is 130 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed. Available cut to your specified length, with fast fabrication and shipping from our Robertsdale, AL facility.
120 mm ID x 130 mm OD honed tube, 5 mm wall, 1026 Carbon Steel. Cut to length.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges. All rod and tubing are cut 0.125" to 0.250" over the requested length to ensure adequate finish stock. No material will be cut below the ordered length (−0.000").
Export To PDF
Item Specifications
-
4.724 in X 5.118 in
-
120 mm
-
1026 Carbon Steel
-
130 mm
-
ASTM A513 Type 5, ST 52.3
-
288 in
-
5 mm
-
0.86 lbs per IN
