115 mm x 140 mm x 12.5 mm Honed Tube - 1026 Carbon Steel
View Related Items
Urethane Material | 95 MM Nominal Inner Diameter | U-Seal
Phenolic Material | 110 MM Nominal Inner Diameter | Wear Ring
70A Durometer | PTFE Material | 99.5 MM Nominal Inner Diameter | Piston Seal
Steel Material | Unitized Piston
115 mm ID x 140 mm OD Honed Tube | 12.5 mm Wall
This 115 mm ID x 140 mm OD honed tube is built for heavy-duty and large-bore hydraulic cylinder applications — mining, construction, and industrial press cylinders — where wall strength and a consistent honed bore are critical. MHT-115X140 has a wall thickness of 12.5 mm. The ID is 115 mm and the OD is 140 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed. Available cut to your specified length, with fast fabrication and shipping from our Robertsdale, AL facility.
| 1-14 | $17.22 |
| 15-44 | $13.36 |
| 45-104 | $12.04 |
| 105+ | $10.96 |
115 mm ID x 140 mm OD honed tube, 12.5 mm wall, 1026 Carbon Steel. Cut to length.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges. All rod and tubing are cut 0.125" to 0.250" over the requested length to ensure adequate finish stock. No material will be cut below the ordered length (−0.000").
Export To PDF
Item Specifications
-
4.528 in X 5.512 in
-
115 mm
-
1026 Carbon Steel
-
140 mm
-
ASTM A513 Type 5, ST 52.3
-
288 in
-
12.5 mm
-
2.19 lbs per IN
View Related Items
Urethane Material | 95 MM Nominal Inner Diameter | U-Seal
Phenolic Material | 110 MM Nominal Inner Diameter | Wear Ring
70A Durometer | PTFE Material | 99.5 MM Nominal Inner Diameter | Piston Seal
Steel Material | Unitized Piston
