110 mm x 134 mm x 12 mm Honed Tube - 1026 Carbon Steel
View Related Items
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
70A Durometer | PTFE Material | 89 MM Nominal Inner Diameter | Piston Seal
Phenolic Material | 105 MM Nominal Inner Diameter | Wear Ring
Urethane Material | 90 MM Nominal Inner Diameter | U-Seal
110 mm ID x 134 mm OD Honed Tube | 12 mm Wall
This 110 mm ID x 134 mm OD honed tube is built for heavy-duty and large-bore hydraulic cylinder applications — mining, construction, and industrial press cylinders — where wall strength and a consistent honed bore are critical. MHT-110X134 has a wall thickness of 12 mm. The ID is 110 mm and the OD is 134 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed. Available cut to your specified length, with fast fabrication and shipping from our Robertsdale, AL facility.
| 1-14 | $14.49 |
| 15-44 | $11.25 |
| 45-104 | $10.13 |
| 105+ | $9.22 |
110 mm ID x 134 mm OD honed tube, 12 mm wall, 1026 Carbon Steel. Cut to length.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges. All rod and tubing are cut 0.125" to 0.250" over the requested length to ensure adequate finish stock. No material will be cut below the ordered length (−0.000").
Export To PDF
Item Specifications
-
4.331 in X 5.276 in
-
110 mm
-
1026 Carbon Steel
-
134 mm
-
ASTM A513 Type 5, ST 52.3
-
288 in
-
12 mm
-
1.84 lbs per IN
View Related Items
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
70A Durometer | PTFE Material | 89 MM Nominal Inner Diameter | Piston Seal
Phenolic Material | 105 MM Nominal Inner Diameter | Wear Ring
Urethane Material | 90 MM Nominal Inner Diameter | U-Seal
