100 mm x 130 mm x 15 mm Honed Tube - 1026 Carbon Steel
100 mm ID x 130 mm OD Honed Tube | 15 mm Wall
This 100 mm ID x 130 mm OD honed tube is built for heavy-duty and large-bore hydraulic cylinder applications — mining, construction, and industrial press cylinders — where wall strength and a consistent honed bore are critical. MHT-100X130 has a wall thickness of 15 mm. The ID is 100 mm and the OD is 130 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed. The heavier wall section supports higher pressure ratings for demanding cylinder rebuild and OEM applications, cut to your specified length and shipped fast from our Robertsdale, AL facility.
100 mm ID x 130 mm OD honed tube, 15 mm wall, 1026 Carbon Steel. Cut to length.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges. All rod and tubing are cut 0.125" to 0.250" over the requested length to ensure adequate finish stock. No material will be cut below the ordered length (−0.000").
Export To PDF
Item Specifications
-
3.937 in X 5.118 in
-
100 mm
-
1026 Carbon Steel
-
130 mm
-
ASTM A513 Type 5, ST 52.3
-
288 in
-
15 mm
-
2.40 lbs per IN
