6 in x 7 in x 0.5 in Honed Tube - 1026 Carbon Steel
6 in ID x 7 in OD Honed Tube | 0.5 in Wall
This 6 in ID x 7 in OD honed tube is built for heavy-duty and large-bore hydraulic cylinder applications like mining, construction, and industrial press cylinders where wall strength and a consistent honed bore are critical.
HT-7000X6000 has a wall thickness of 0.5 in. The ID is 6 in and the OD is 7 in. The material is 1026 Carbon Steel and has been stress-relieved and annealed. The heavier wall section supports higher pressure ratings for demanding cylinder rebuild and OEM applications, cut to your specified length and shipped fast from our Robertsdale, AL facility.
| 1-14 | $16.38 |
| 15-59 | $14.32 |
| 60-89 | $12.72 |
| 90+ | $11.46 |
6 in ID x 7 in OD honed tube, 0.5 in wall, 1026 Carbon Steel. Cut to length.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges. All rod and tubing are cut 0.125" to 0.250" over the requested length to ensure adequate finish stock. No material will be cut below the ordered length (−0.000").
Export To PDF
Item Specifications
-
6 in
-
1026 Carbon Steel
-
7 in
-
ASTM A513 Type 5, ST 52.3
-
288 in
-
0.5 in
-
2.89 lbs per IN
