160 mm x 190.5 mm x 15.25 mm Honed Tube - 1026 Carbon Steel
160 mm ID x 190.5 mm OD Honed Tube | 15.25 mm Wall
This 160 mm ID x 190.5 mm OD honed tube is built for heavy-duty and large-bore hydraulic cylinder applications — mining, construction, and industrial press cylinders — where wall strength and a consistent honed bore are critical. MHT-160X190.5 has a wall thickness of 15.25 mm. The ID is 160 mm and the OD is 190.5 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed. The heavier wall section supports higher pressure ratings for demanding cylinder rebuild and OEM applications, cut to your specified length and shipped fast from our Robertsdale, AL facility.
160 mm ID x 190.5 mm OD honed tube, 15.25 mm wall, 1026 Carbon Steel. Cut to length.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges. All rod and tubing are cut 0.125" to 0.250" over the requested length to ensure adequate finish stock. No material will be cut below the ordered length (−0.000").
Export To PDF
Item Specifications
-
6.299 in X 7.500 in
-
160 mm
-
1026 Carbon Steel
-
190.5 mm
-
ASTM A513 Type 5, ST 52.3
-
288 in
-
15.25 mm
-
3.67 lbs per IN
