Search Results
Search Filters
-
Honed Tube x
Filter Your Search
Inside Diameter
Material
Outside Diameter
Unit of Measure
Wall Thickness
Shop by Category
MHT-85X108 has a wall thickness of 11.5 mm. The ID is 85 mm and the OD is 108 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $11.99 |
| 15-74 | $9.31 |
| 75-104 | $8.39 |
| 105+ | $7.63 |
MHT-200X230 has a wall thickness of 15 mm. The ID is 200 mm and the OD is 230 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $29.03 |
| 15-44 | $22.53 |
| 45-104 | $20.30 |
| 105+ | $18.47 |
HT-6250X5500 has a wall thickness of 0.375 in. The ID is 5.5 in and the OD is 6.25 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $12.05 |
| 15-59 | $10.54 |
| 60-104 | $9.36 |
| 105+ | $8.43 |
MHT-55X2.750 has a wall thickness of 7.425 mm. The ID is 55 mm and the OD is 69.85 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $10.01 |
| 15-74 | $7.77 |
| 75-104 | $7.00 |
| 105+ | $6.37 |
MHT-60X2.750 has a wall thickness of 4.925 mm. The ID is 60 mm and the OD is 69.85 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $7.15 |
| 15-74 | $5.55 |
| 75-104 | $5.00 |
| 105+ | $4.55 |
HT-7500X6500 has a wall thickness of 0.5 in. The ID is 6.5 in and the OD is 7.5 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $20.35 |
| 15-59 | $17.79 |
| 60-89 | $15.80 |
| 90+ | $14.23 |
HT-9500X8500 has a wall thickness of 0.5 in. The ID is 8.5 in and the OD is 9.5 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $28.13 |
| 15-59 | $24.98 |
| 60-89 | $22.50 |
| 90+ | $20.48 |
HT-4250X3750 has a wall thickness of 0.25 in. The ID is 3.75 in and the OD is 4.25 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $6.33 |
| 15-59 | $5.43 |
| 60-104 | $4.75 |
| 105-149 | $4.22 |
| 150+ | $3.80 |
MHT-60X77 has a wall thickness of 8.5 mm. The ID is 60 mm and the OD is 77 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $4.29 |
| 15-74 | $3.33 |
| 75-104 | $3.00 |
| 105+ | $2.73 |
HT-14000X12000CDS has a wall thickness of 1 in. The ID is 12 in and the OD is 14 in. The material is CDSM 1026 Carbon Steel and has been stress-relieved and annealed.
This tube has been produced using the cold drawing process and is seamless. The cold drawing process produces higher physical properties without additional heat treating resulting in good strength to weight ratios.
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $88.80 |
| 15-59 | $72.80 |
| 60+ | $66.80 |
