Search Results
Search Filters
-
Aluminum Tube x
Filter Your Search
Inside Diameter
Outside Diameter
Wall Thickness
Shop by Category
ALHT6250X6000 has a 0.125 in wall thickness. The ID is 6 in and the OD is 6.25 in. The material is 6063-T832 Aluminum.
Seamless extruded and cold-drawn. Hard coated on the ID which gives the aluminum tube a tough, abrasive-resitant surface.
6063-T832 Aluminum is used for pneumatic cylinder applications requiring very good corrosion resistance and/or light weight. Can also be used for low-pressure oil cylinders (250 psi or less).
- No machining required on the ID
- Seamless extruded and cold-drawn
- Hard coated interior
- Corrosion resistance
- Good weldability
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $15.00 |
| 15-29 | $12.49 |
| 30-104 | $10.73 |
| 105+ | $8.33 |
ALHT4250X4000 has a 0.125 in wall thickness. The ID is 4 in and the OD is 4.25 in. The material is 6063-T832 Aluminum.
Seamless extruded and cold-drawn. Hard coated on the ID which gives the aluminum tube a tough, abrasive-resitant surface.
6063-T832 Aluminum is used for pneumatic cylinder applications requiring very good corrosion resistance and/or light weight. Can also be used for low-pressure oil cylinders (250 psi or less).
- No machining required on the ID
- Seamless extruded and cold-drawn
- Hard coated interior
- Corrosion resistance
- Good weldability
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $8.11 |
| 15-29 | $6.75 |
| 30-104 | $5.80 |
| 105+ | $4.50 |
ALHT5250X5000 has a 0.125 in wall thickness. The ID is 5 in and the OD is 5.25 in. The material is 6063-T832 Aluminum.
Seamless extruded and cold-drawn. Hard coated on the ID which gives the aluminum tube a tough, abrasive-resitant surface.
6063-T832 Aluminum is used for pneumatic cylinder applications requiring very good corrosion resistance and/or light weight. Can also be used for low-pressure oil cylinders (250 psi or less).
- No machining required on the ID
- Seamless extruded and cold-drawn
- Hard coated interior
- Corrosion resistance
- Good weldability
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $10.05 |
| 15-29 | $8.36 |
| 30-104 | $7.18 |
| 105+ | $5.58 |
ALHT8375X8000 has a 0.1875 in wall thickness. The ID is 8 in and the OD is 8.375 in. The material is 6063-T832 Aluminum.
Seamless extruded and cold-drawn. Hard coated on the ID which gives the aluminum tube a tough, abrasive-resitant surface.
6063-T832 Aluminum is used for pneumatic cylinder applications requiring very good corrosion resistance and/or light weight. Can also be used for low-pressure oil cylinders (250 psi or less).
- No machining required on the ID
- Seamless extruded and cold-drawn
- Hard coated interior
- Corrosion resistance
- Good weldability
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $32.84 |
| 15-44 | $23.48 |
| 45+ | $18.23 |
ALHT2750X2500 has a 0.125 in wall thickness. The ID is 2.5 in and the OD is 2.75 in. The material is 6063-T832 Aluminum.
Seamless extruded and cold-drawn. Hard coated on the ID which gives the aluminum tube a tough, abrasive-resitant surface.
6063-T832 Aluminum is used for pneumatic cylinder applications requiring very good corrosion resistance and/or light weight. Can also be used for low-pressure oil cylinders (250 psi or less).
- No machining required on the ID
- Seamless extruded and cold-drawn
- Hard coated interior
- Corrosion resistance
- Good weldability
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $8.30 |
| 15-29 | $6.64 |
| 30-104 | $4.75 |
| 105+ | $3.69 |
ALHT3250X3000 has a 0.125 in wall thickness. The ID is 3 in and the OD is 3.25 in. The material is 6063-T832 Aluminum.
Seamless extruded and cold-drawn. Hard coated on the ID which gives the aluminum tube a tough, abrasive-resitant surface.
6063-T832 Aluminum is used for pneumatic cylinder applications requiring very good corrosion resistance and/or light weight. Can also be used for low-pressure oil cylinders (250 psi or less).
- No machining required on the ID
- Seamless extruded and cold-drawn
- Hard coated interior
- Corrosion resistance
- Good weldability
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $5.87 |
| 15-29 | $4.70 |
| 30-104 | $3.36 |
| 105+ | $2.61 |
ALHT3500X3250 has a 0.125 in wall thickness. The ID is 3.5 in and the OD is 3.25 in. The material is 6063-T832 Aluminum.
Seamless extruded and cold-drawn. Hard coated on the ID which gives the aluminum tube a tough, abrasive-resitant surface.
6063-T832 Aluminum is used for pneumatic cylinder applications requiring very good corrosion resistance and/or light weight. Can also be used for low-pressure oil cylinders (250 psi or less).
- No machining required on the ID
- Seamless extruded and cold-drawn
- Hard coated interior
- Corrosion resistance
- Good weldability
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $5.35 |
| 15-29 | $4.28 |
| 30-104 | $3.06 |
| 105+ | $2.38 |
ALHT3750X3500 has a 0.125 in wall thickness. The ID is 3.5 in and the OD is 3.75 in. The material is 6063-T832 Aluminum.
Seamless extruded and cold-drawn. Hard coated on the ID which gives the aluminum tube a tough, abrasive-resitant surface.
6063-T832 Aluminum is used for pneumatic cylinder applications requiring very good corrosion resistance and/or light weight. Can also be used for low-pressure oil cylinders (250 psi or less).
- No machining required on the ID
- Seamless extruded and cold-drawn
- Hard coated interior
- Corrosion resistance
- Good weldability
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $7.25 |
| 15-29 | $5.80 |
| 30-104 | $4.14 |
| 105+ | $3.22 |
ALHT2250X2000 has a 0.125 in wall thickness. The ID is 2 in and the OD is 2.25 in. The material is 6063-T832 Aluminum.
Seamless extruded and cold-drawn. Hard coated on the ID which gives the aluminum tube a tough, abrasive-resitant surface.
6063-T832 Aluminum is used for pneumatic cylinder applications requiring very good corrosion resistance and/or light weight. Can also be used for low-pressure oil cylinders (250 psi or less).
- No machining required on the ID
- Seamless extruded and cold-drawn
- Hard coated interior
- Corrosion resistance
- Good weldability
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $3.43 |
| 15-29 | $2.74 |
| 30-104 | $1.96 |
| 105+ | $1.52 |
ALHT4750X4500 has a 0.125 in wall thickness. The ID is 4.5 in and the OD is 4.75 in. The material is 6063-T832 Aluminum.
Seamless extruded and cold-drawn. Hard coated on the ID which gives the aluminum tube a tough, abrasive-resitant surface.
6063-T832 Aluminum is used for pneumatic cylinder applications requiring very good corrosion resistance and/or light weight. Can also be used for low-pressure oil cylinders (250 psi or less).
- No machining required on the ID
- Seamless extruded and cold-drawn
- Hard coated interior
- Corrosion resistance
- Good weldability
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $7.82 |
| 15-29 | $6.51 |
| 30-104 | $5.59 |
| 105+ | $4.34 |
