140 mm x 166 mm x 13 mm Honed Tube - 1026 Carbon Steel
View Related Items
Urethane Material | 120 MM Nominal Inner Diameter | U-Seal
Phenolic Material | 135 MM Nominal Inner Diameter | Wear Ring
70A Durometer | PTFE Material | 119 MM Nominal Inner Diameter | Piston Seal
70mm IHMCPO C1045/C1050 50-100K
140 mm ID x 166 mm OD Honed Tube | 13 mm Wall
This 140 mm ID x 166 mm OD honed tube is built for heavy-duty and large-bore hydraulic cylinder applications — mining, construction, and industrial press cylinders — where wall strength and a consistent honed bore are critical. MHT-140X166 has a wall thickness of 13 mm. The ID is 140 mm and the OD is 166 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed. The heavier wall section supports higher pressure ratings for demanding cylinder rebuild and OEM applications, cut to your specified length and shipped fast from our Robertsdale, AL facility.
| 1-14 | $21.59 |
| 15-44 | $16.76 |
| 45-104 | $15.10 |
| 105+ | $13.74 |
140 mm ID x 166 mm OD honed tube, 13 mm wall, 1026 Carbon Steel. Cut to length.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges. All rod and tubing are cut 0.125" to 0.250" over the requested length to ensure adequate finish stock. No material will be cut below the ordered length (−0.000").
Export To PDF
Item Specifications
-
5.512 in X 6.535 in
-
140 mm
-
1026 Carbon Steel
-
166 mm
-
ASTM A513 Type 5, ST 52.3
-
288 in
-
13 mm
-
2.75 lbs per IN
View Related Items
Urethane Material | 120 MM Nominal Inner Diameter | U-Seal
Phenolic Material | 135 MM Nominal Inner Diameter | Wear Ring
70A Durometer | PTFE Material | 119 MM Nominal Inner Diameter | Piston Seal
70mm IHMCPO C1045/C1050 50-100K
