2 in ID Chrome Plated Tube
View Related Items
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
Tie rods are sold in 12 ft. lengths only. Rods can be cut for UPS shipment or left whole, if necessary. Freight charges may vary depending on required length.
Tie rods are sold in 12 ft. lengths only. Rods can be cut for UPS shipment or left whole, if necessary. Freight charges may vary depending on required length.
CIHT2240X2000 Chrome Plated Tube
CIHT2240X2000 has a wall thickness of 0.12 in. The ID is 2 in and the OD is 2.24 in. The material is 1026 Carbon Steel with chrome plating on the Inside Surface.
| 1-14 | $4.50 |
| 15-29 | $3.22 |
| 30-74 | $2.50 |
| 75+ | $2.25 |
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges. All rod and tubing are cut 0.125" to 0.250" over the requested length to ensure adequate finish stock. No material will be cut below the ordered length (−0.000").
Export To PDF
Item Specifications
-
Inside
-
2 in
-
1026 Carbon Steel
-
2.24 in
-
ASTM A513 Type 5
-
12 - 24 ft.
-
0.12 in
-
0.24 lbs per IN
View Related Items
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
Tie rods are sold in 12 ft. lengths only. Rods can be cut for UPS shipment or left whole, if necessary. Freight charges may vary depending on required length.
Tie rods are sold in 12 ft. lengths only. Rods can be cut for UPS shipment or left whole, if necessary. Freight charges may vary depending on required length.
