Hydraulic Buffer Seals – Shock-Absorption for Rod Seal Protection

Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes to protect the rod seal. Bronze-filled Teflon rod buffer seal with a rubber energizer.

Bronze Filled PTFE Material | 5 in Nominal Inner Diameter | Buffer Seal

Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes to protect the rod seal.

70A Durometer | Filled PTFE Buffer Material | 110 MM Nominal Inner Diameter | Buffer Seal

Molded in urethane and employing a back-up, this seal absorbs the shock of pressure spikes to protect the rod seal. The unique design relieves back pressure between the buffer and the rod seal. NOTE: ME = Merkel Equivalent.

Urethane Material | 50 MM Nominal Inner Diameter | Buffer Seal

The RBS style rod buffer seals are a rectangular urethane buffer ring designed to absorb pressure fluctuations to protect the primary rod seal. Some sizes include a radial and axial slot, which faces the pressure, to relieve back pressure between the primary and buffer seal. This simple design is commonly found on older construction equipment.

92A Durometer | Urethane Material | 1 1/2 in Nominal Inner Diameter | Buffer Seal

Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes to protect the rod seal. Bronze-filled Teflon rod buffer seal with a rubber energizer.

Bronze Filled PTFE Material | 3 1/2 in Nominal Inner Diameter | Buffer Seal

This U-cup style buffer ring offers an asymmetric sealing lip profile, chamfered sealing edges, and pressure relieving capabilities to prevent inner pressure entrapment when employed in a tandem sealing system. This rod buffer seal is designed to absorb impact pressure fluctuations under high-load conditions thus increasing the life of the primary seal.

Urethane Material | 1 3/4 in Nominal Inner Diameter | Buffer Seal

Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes to protect the rod seal.

70A Durometer | Filled PTFE Buffer Material | 80 MM Nominal Inner Diameter | Buffer Seal

Molded in urethane and employing a back-up, this seal absorbs the shock of pressure spikes to protect the rod seal. The unique design relieves back pressure between the buffer and the rod seal. NOTE: ME = Merkel Equivalent.

Urethane Material | 63 MM Nominal Inner Diameter | Buffer Seal

Molded in bronze-filled PTFE with an FKM energizer, this seal is used to protect the primary seal from damage caused by pressure spikes and excessive heat build up.

Bronze PTFE Buffer Material | 35 MM Nominal Inner Diameter | Buffer Seal

Molded in bronze-filled PTFE with an FKM energizer, this seal is used to protect the primary seal from damage caused by pressure spikes and excessive heat build up.

Bronze PTFE Buffer Material | 40 MM Nominal Inner Diameter | Buffer Seal