HTW50 Torque Monster Repair Bench — Cylinder Torque System

The Torque Monster Premier 50 Package is the flagship of the 50,000 ft/lb Torque Monster lineup, built for shops that want to disassemble, rebuild, and function-test cylinders without moving between separate stations.

It includes the same 20-foot table, push/pull cylinder, 2 oil trays, 2 tool trays, and hydraulic hoses found in our Advanced 50 Package, but replaces the standard power unit with a combination power unit and test stand — giving you the ability to cycle and pressure-test a rebuilt cylinder right at the bench before it goes back into service.

The 50,000 ft/lb torque head handles the heavy lifting of breaking loose seized piston nuts and cylinder glands, while the push/pull cylinder drives the rod assembly in and out of the barrel during teardown and reassembly. Once the cylinder is rebuilt, the integrated test stand lets you verify seal integrity, rod travel, and pressure performance on the same equipment — no need to disconnect, relocate, or hook up separate test rig hydraulics.

As with every Torque Monster package, the Premier 50 comes complete with all seven attachments:

13 Hex Plates (12 sizes from 80mm–170mm, plus a 1.5” socket plate) — 9” x 9” x 1” thick plates for gripping and turning nuts across a wide range of cylinder diameters

Front Eye Holder — anchors the front eye of the cylinder while the nut is broken loose

Back Eye Holder — rotates with the head to loosen the gland while the cylinder stays fixed in place

Gland Wrench Set — 2-in-1 pipe and spanner wrench combination for a secure, slip-free grip on end caps

2 Heavy-Duty 2.27-Ton Lifting Jacks — aluminum-padded jacks for precise rod and tube alignment

Push/Pull Plate — connects the bench to the back eye of the push/pull cylinder for smooth rod removal and reinstallation

2 Heavy-Duty Chain Vises — bench-mounted vises that hold cylinders firmly in place during teardown

The Premier 50 is the right choice for shops that want to control quality from disassembly through final testing on a single, integrated system — reducing handling, saving floor space, and giving you confidence that every rebuilt cylinder performs before it ships.

Our top-of-the-line 50,000 ft/lb bench. The Torque Monster Premier 50 Package includes everything in the Advanced 50, upgraded with a combination power unit and test stand — so you can disassemble, rebuild, and pressure-test cylinders on the same station. Complete with the 20-foot table, push/pull cylinder, oil and tool trays, hydraulic hoses, and all seven attachments, it’s the most capable Torque Monster package available.

The Torque Monster Basic 50 Package builds on the same 50,000 ft/lb torque head and push/pull cylinder found in our Economy tier, but adds the workbench itself: a 20-foot table designed to support cylinders of significant length while they’re being disassembled, serviced, and rebuilt.

The table comes fitted with 2 oil trays to catch drips and keep the work area clean, 2 tool trays to keep wrenches and attachments within arm’s reach, and hydraulic hoses ready to connect to your own power unit (not included with this package).

The torque head generates the cracking force needed to break loose seized piston nuts and glands, while the push/pull cylinder handles driving the rod assembly in and out of the barrel.

As with every Torque Monster package, the Basic 50 includes the full attachment lineup:

13 Hex Plates (12 sizes from 80mm–170mm, plus a 1.5” socket plate) — 9” x 9” x 1” thick plates for gripping and turning nuts across a wide range of cylinder sizes

Front Eye Holder — anchors the front eye of the cylinder while the nut is broken loose

Back Eye Holder — rotates with the head to loosen the gland while keeping the cylinder in place

Gland Wrench Set — 2-in-1 pipe and spanner wrench combination for a secure, slip-free grip on end caps

2 Heavy-Duty 2.27-Ton Lifting Jacks — aluminum-padded jacks for precise rod and tube alignment

Push/Pull Plate — links the bench to the back eye of the push/pull cylinder for smooth rod removal and reinstallation

2 Heavy-Duty Chain Vices — bench-mounted vises that hold cylinders firmly in place during teardown

The Basic 50 is built for shops that want a dedicated, purpose-built repair table rather than mounting the torque head to an existing bench — giving you more usable workspace, better organization, and a cleaner shop floor. Ideal for cylinder repair operations that already have a compatible power unit on hand and want to add a full disassembly station without paying for hydraulics they don’t need.

Step up to a full 20-foot workbench built around 50,000 ft/lb of torque. The Torque Monster Basic 50 Package pairs the same proven torque head and push/pull cylinder with a dedicated 20-foot repair table, oil and tool trays, hydraulic hoses, and all seven attachments — giving your shop a real workstation for tearing down and rebuilding hydraulic cylinders. (Power unit not included.)

The Torque Monster Economy 50 Package is a complete hydraulic cylinder repair and disassembly system built for shops that rebuild cylinders on a regular basis.

At its core is a 50,000 ft/lb torque head that uses two counteracting hydraulic cylinders to generate the cracking force needed to break loose seized piston nuts and cylinder glands — jobs that are difficult, slow, and often unsafe to do by hand. A dedicated push/pull cylinder is included to drive the rod assembly in and out of the cylinder barrel cleanly and efficiently.

This package comes fully equipped with all seven attachments needed to handle a wide range of cylinder sizes and repair jobs:

13 Hex Plates (12 sizes from 80mm–170mm, plus a 1.5” socket plate) — 9” x 9” x 1” thick plates that lock into the head to grip and turn nuts of varying sizes

Front Eye Holder — secures the front eye of the cylinder while the nut is removed

Back Eye Holder — rotates with the head to loosen the gland while the cylinder stays fixed in place

Gland Wrench Set — a 2-in-1 pipe wrench and spanner wrench combination that grips end caps securely without slipping

2 Heavy-Duty 2.27-Ton Lifting Jacks — aluminum-padded jacks that align the rod or tube before torque is applied

Push/Pull Plate — connects the workbench to the back eye of the push/pull cylinder for smooth rod removal and installation

2 Heavy-Duty Chain Vises — bench-mounted vises that hold cylinders steady during disassembly and gland removal

Whether you’re servicing cylinders for mining, oil and gas, forestry, marine, or construction equipment, the Torque Monster Economy 50 gives your shop the torque, holding power, and attachment versatility to disassemble and reassemble cylinders safely and efficiently — all in one bench, ready to go.

Break down and rebuild heavy-duty hydraulic cylinders with confidence. The Torque Monster Economy 50 Package delivers 50,000 ft/lb of cracking torque to safely disassemble stubborn piston nuts and cylinder glands, backed by a full push/pull cylinder and all seven essential attachments — hex plates, eye holders, gland wrench set, lifting jacks, push/pull plate, and heavy-duty chain vises.

Built for hydraulic repair shops that need a reliable, all-in-one disassembly bench without the premium price tag.

The Torque Monster Advanced 50 Package is the fully self-contained version of our 50,000 ft/lb disassembly bench — everything your shop needs in one package, with nothing left to source separately.

It includes the same 20-foot table as the Basic 50, built to support long cylinders during teardown and rebuild, along with 2 oil trays, 2 tool trays, hydraulic hoses, and a standard power unit already matched and ready to connect. Where the Basic 50 leaves the power unit up to you, the Advanced 50 arrives complete and ready to run.

At the heart of the system is the 50,000 ft/lb torque head, generating the cracking force needed to break loose seized piston nuts and glands, paired with a push/pull cylinder for driving the rod assembly cleanly in and out of the barrel.

Every Torque Monster package also includes the full set of seven attachments:

13 Hex Plates (12 sizes from 80mm–170mm, plus a 1.5” socket plate) — 9” x 9” x 1” thick plates for gripping and turning nuts across a wide range of cylinder diameters

Front Eye Holder — anchors the front eye of the cylinder while the nut is broken loose

Back Eye Holder — rotates with the head to loosen the gland while the cylinder stays fixed

Gland Wrench Set — 2-in-1 pipe and spanner wrench combination for a secure, slip-free grip on end caps

2 Heavy-Duty 2.27-Ton Lifting Jacks — aluminum-padded jacks for precise rod and tube alignment

Push/Pull Plate — connects the bench to the back eye of the push/pull cylinder for smooth rod removal and reinstallation

2 Heavy-Duty Chain Vises — bench-mounted vises that hold cylinders firmly in place during teardown

The Advanced 50 is built for shops that want to unbox, connect, and start disassembling cylinders the same day — no matching a power unit to hydraulic specs, no extra procurement, no downtime waiting on compatible parts. It’s the most turnkey option in the 50,000 ft/lb Torque Monster lineup, ideal for shops opening a new repair line or replacing aging equipment with a complete, ready-to-run station.

The complete, ready-to-run solution. The Torque Monster Advanced 50 Package includes everything in the Basic 50 — the 20-foot table, push/pull cylinder, oil and tool trays, and all seven attachments — plus a standard power unit and hydraulic hoses, so it’s fully self-contained right out of the crate. No sourcing a separate power unit, no compatibility guesswork — just 50,000 ft/lb of torque, ready to work.