Browse Categories

Kraken Marine Bearings – Rubber-Lined Brass Bearings

Kraken Bearings 
Viewing Page 4 of 5 (48 results)

This Kraken bearing fits a 3 in prop shaft, with a 3.75 in OD and 12 in length for strut, stern tube and rudder or pintle positions.


The naval brass shell carries a grooved nitrile rubber lining that flushes sand and grit away from the shaft, and every bearing is ground concentric to meet or exceed U.S. Navy BuShips plan 810-1385664.


Measure your shaft, housing bore and length to confirm the fit before you order. Need a different OD or length for the same shaft? See every size in the Kraken bearing lineup.

Naval brass, nitrile lined shaft bearing for a 3 in shaft. 3.75 in OD, 12 in long.

Loading...
/EA

This Kraken bearing fits a 3 in prop shaft, with a 4 in OD and 12 in length for strut, stern tube and rudder or pintle positions.


The naval brass shell carries a grooved nitrile rubber lining that flushes sand and grit away from the shaft, and every bearing is ground concentric to meet or exceed U.S. Navy BuShips plan 810-1385664.


Measure your shaft, housing bore and length to confirm the fit before you order. Need a different OD or length for the same shaft? See every size in the Kraken bearing lineup.

Naval brass, nitrile lined shaft bearing for a 3 in shaft. 4 in OD, 12 in long.

Loading...
/EA

This Kraken bearing fits a 3 in prop shaft, with a 4 in OD and 12 in length for strut, stern tube and rudder or pintle positions.


The naval brass shell carries a grooved nitrile rubber lining that flushes sand and grit away from the shaft, and every bearing is ground concentric to meet or exceed U.S. Navy BuShips plan 810-1385664.


Measure your shaft, housing bore and length to confirm the fit before you order. Need a different OD or length for the same shaft? See every size in the Kraken bearing lineup.

Naval brass, nitrile lined shaft bearing for a 3 in shaft. 4 in OD, 12 in long.

Loading...
/EA

This Kraken bearing fits a 3.25 in prop shaft, with a 4 in OD and 13 in length for strut, stern tube and rudder or pintle positions.


The naval brass shell carries a grooved nitrile rubber lining that flushes sand and grit away from the shaft, and every bearing is ground concentric to meet or exceed U.S. Navy BuShips plan 810-1385664.


Measure your shaft, housing bore and length to confirm the fit before you order. Need a different OD or length for the same shaft? See every size in the Kraken bearing lineup.

Naval brass, nitrile lined shaft bearing for a 3.25 in shaft. 4 in OD, 13 in long.

Loading...
/EA

This Kraken bearing fits a 3.25 in prop shaft, with a 4.25 in OD and 13 in length for strut, stern tube and rudder or pintle positions.


The naval brass shell carries a grooved nitrile rubber lining that flushes sand and grit away from the shaft, and every bearing is ground concentric to meet or exceed U.S. Navy BuShips plan 810-1385664.


Measure your shaft, housing bore and length to confirm the fit before you order. Need a different OD or length for the same shaft? See every size in the Kraken bearing lineup.

Naval brass, nitrile lined shaft bearing for a 3.25 in shaft. 4.25 in OD, 13 in long.

Loading...
/EA

This Kraken bearing fits a 3.5 in prop shaft, with a 4.25 in OD and 14 in length for strut, stern tube and rudder or pintle positions.


The naval brass shell carries a grooved nitrile rubber lining that flushes sand and grit away from the shaft, and every bearing is ground concentric to meet or exceed U.S. Navy BuShips plan 810-1385664.


Measure your shaft, housing bore and length to confirm the fit before you order. Need a different OD or length for the same shaft? See every size in the Kraken bearing lineup.

Naval brass, nitrile lined shaft bearing for a 3.5 in shaft. 4.25 in OD, 14 in long.

Loading...
/EA

This Kraken bearing fits a 3.5 in prop shaft, with a 4.5 in OD and 14 in length for strut, stern tube and rudder or pintle positions.


The naval brass shell carries a grooved nitrile rubber lining that flushes sand and grit away from the shaft, and every bearing is ground concentric to meet or exceed U.S. Navy BuShips plan 810-1385664.


Measure your shaft, housing bore and length to confirm the fit before you order. Need a different OD or length for the same shaft? See every size in the Kraken bearing lineup.

Naval brass, nitrile lined shaft bearing for a 3.5 in shaft. 4.5 in OD, 14 in long.

Loading...
/EA

This Kraken bearing fits a 3.5 in prop shaft, with a 4.5 in OD and 14 in length for strut, stern tube and rudder or pintle positions.


The naval brass shell carries a grooved nitrile rubber lining that flushes sand and grit away from the shaft, and every bearing is ground concentric to meet or exceed U.S. Navy BuShips plan 810-1385664.


Measure your shaft, housing bore and length to confirm the fit before you order. Need a different OD or length for the same shaft? See every size in the Kraken bearing lineup.

Naval brass, nitrile lined shaft bearing for a 3.5 in shaft. 4.5 in OD, 14 in long.

Loading...
/EA

This Kraken bearing fits a 4 in prop shaft, with a 5 in OD and 16 in length for strut, stern tube and rudder or pintle positions.


The naval brass shell carries a grooved nitrile rubber lining that flushes sand and grit away from the shaft, and every bearing is ground concentric to meet or exceed U.S. Navy BuShips plan 810-1385664.


Measure your shaft, housing bore and length to confirm the fit before you order. Need a different OD or length for the same shaft? See every size in the Kraken bearing lineup.

Naval brass, nitrile lined shaft bearing for a 4 in shaft. 5 in OD, 16 in long.

Loading...
/EA

This Kraken bearing fits a 4 in prop shaft, with a 5.25 in OD and 16 in length for strut, stern tube and rudder or pintle positions.


The naval brass shell carries a grooved nitrile rubber lining that flushes sand and grit away from the shaft, and every bearing is ground concentric to meet or exceed U.S. Navy BuShips plan 810-1385664.


Measure your shaft, housing bore and length to confirm the fit before you order. Need a different OD or length for the same shaft? See every size in the Kraken bearing lineup.

Naval brass, nitrile lined shaft bearing for a 4 in shaft. 5.25 in OD, 16 in long.

Loading...
/EA
  • « PREV
  • 1
  • 2
  • 3
  • 4
  • 5
  • NEXT »