Wipers

This wiper is a single lip design molded from high grade urethane and bonded to a carbon steel case.

Urethane Material | 50 MM Nominal Inner Diameter | Wiper

This wiper features a lip on top of the shoulder which makes contact with the throat of the groove. This serves to prevent contaminants from entering the groove.

Urethane Material | 32 MM Inner Diameter | Wiper

Molded in urethane, this wiper is flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications.

Urethane Material | 40 MM Inner Diameter | Wiper

Molded in urethane, this wiper features a double lip which prevents fluid that seeps by the rod seal from exiting the cylinder.

Urethane Material | 32 MM Inner Diameter | Wiper

Style ST-XL wipers are molded from premium urethane and are direct replacements for Style “ST” or “D” wipers. The outside diameter of the ring has a crush lip providing extra interference in the groove. A bead on the shoulder stops contaminates from entering through the groove. The inside diameter is ribbed to prevent pressure traps between the wiper and rod seal.

94A Durometer | Urethane Material | 3 3/4 in Nominal Inner Diameter

This wiper is a single lip design molded from high grade urethane and bonded to a carbon steel case.

Urethane Material | 35 MM Nominal Inner Diameter | Wiper

This wiper is molded from high grade urethane and bonded to a carbon steel case in a single lip design.

Urethane Material | 30 MM Nominal Inner Diameter | Wiper

Molded in urethane, this wiper features a double lip which prevents fluid that seeps by the rod seal from exiting the cylinder.

Urethane Material | 75 MM Inner Diameter | Wiper

This wiper is a single lip design molded from high grade urethane and bonded to a carbon steel case.

Urethane Material | 50 MM Nominal Inner Diameter | Wiper

This wiper is a single lip design molded from high grade urethane and bonded to a carbon steel case.

Urethane Material | 70 MM Nominal Inner Diameter | Wiper